.:HSTuners::

07-19-2002, 02:51 PM

anyone know how make the keyless entry work after you take out the stock head unit. I know it's got the keyless entry sensor in it.... but it's not like i can run a power cable b/c it has those stupid clips..?

Racing Rice · 07-19-2002, 09:58 PM

You have to leave you stock radio in some how. Like slip it behind the console, or mount you radio somewhere else.

I mounted mine somewhere else.

Onyx · 07-21-2002, 12:13 AM

I just installed a alarm

*pdiggitydogg* · 07-21-2002, 02:55 PM

Yeah you gotta put power, and back-up, along with that entire set of wires from the green connector that WAS connected to the stock unit back to the radio. I put mine under the seat which meant a ton of wire and lengthening and soldering but its out of the way and my keyless works. (I just did this recently). You can get a "Y" connector for your stereo that will power the new unit and the stock. Try Crutchfield.com , you can probably get one there for like $5.

07-21-2002, 07:58 PM

tight thanks

thermal · 07-23-2002, 08:29 PM

go to Best Buy and get the harness. i replaced the stock radio before with an aftermarket one to keep the keyless entry. then when my aftermarket head unit face piece got stolen, i removed the head unit BUT kept the harness installed, my keyless entry still functions......just gotta have that harness.......peace

07-24-2002, 01:41 PM

I had my stock head unit pushed back and the new head unit placed in front of it

, keyless entry works fine. I know that sounds weird with 2 units in there, but iv had no problems. Go to best buy, they can do it for you.

2000Pimpinex · 07-24-2002, 04:12 PM

I think instead of putting the old head unit behind the new one, it will be easier to just buy the harness. Good luck

*pdiggitydogg* · 07-24-2002, 04:55 PM

no you have to have the old unit in in order for the keyless to work. Crazy honda people.

07-25-2002, 01:13 PM

ya, place the stock radio behind the console. that is what i did.

08-18-2002, 01:29 AM

ditto

07-19-2002, 02:51 PM	#1
Aniliticalstud Posts: n/a	keyless entry gone :( anyone know how make the keyless entry work after you take out the stock head unit. I know it's got the keyless entry sensor in it.... but it's not like i can run a power cable b/c it has those stupid clips..?

07-19-2002, 09:58 PM	#2
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	You have to leave you stock radio in some how. Like slip it behind the console, or mount you radio somewhere else. I mounted mine somewhere else. __________________ Racing Rice

07-23-2002, 08:29 PM	#6
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	go to Best Buy and get the harness. i replaced the stock radio before with an aftermarket one to keep the keyless entry. then when my aftermarket head unit face piece got stolen, i removed the head unit BUT kept the harness installed, my keyless entry still functions......just gotta have that harness.......peace __________________ Project Teg Visit the Turbo Forum

07-24-2002, 04:12 PM	#8
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	I think instead of putting the old head unit behind the new one, it will be easier to just buy the harness. Good luck __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-21-2002, 12:13 AM	#3
Onyx 1st Gear Join Date: Dec 2001 Location: Newport News VA Posts: 96	I just installed a alarm

07-21-2002, 02:55 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Yeah you gotta put power, and back-up, along with that entire set of wires from the green connector that WAS connected to the stock unit back to the radio. I put mine under the seat which meant a ton of wire and lengthening and soldering but its out of the way and my keyless works. (I just did this recently). You can get a "Y" connector for your stereo that will power the new unit and the stock. Try Crutchfield.com , you can probably get one there for like $5.

07-21-2002, 07:58 PM	#5
Aniliticalstud Posts: n/a	tight thanks

07-24-2002, 01:41 PM	#7
Civicfrenzy Posts: n/a	I had my stock head unit pushed back and the new head unit placed in front of it , keyless entry works fine. I know that sounds weird with 2 units in there, but iv had no problems. Go to best buy, they can do it for you.

07-24-2002, 04:55 PM	#9
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	no you have to have the old unit in in order for the keyless to work. Crazy honda people.

07-25-2002, 01:13 PM	#10
HondaTypeJ Posts: n/a	ya, place the stock radio behind the console. that is what i did.

08-18-2002, 01:29 AM	#11
ArixSin Posts: n/a	ditto