.:HSTuners::

09-23-2004, 09:30 PM

Well after I had my intake and headers put on my car has been idling a little low, so now when I come to a stop at a red light or whatever it drops to .5k rpms and lower and I can hear what sounds like a metalic high pitch rubbing sort of noise, now I know I need to replace my belts because they squeek every so often but this sound comes from the same area, but its not the belts. Now if I give it a little gas to around 1k the noise fades away. So if it is the pulleys I would rather just replace them with aftermarket ones instead of just turning up the idle so I cant hear it anymore. Any suggestions or opinions on the problem would be great.

*pdiggitydogg* · 09-23-2004, 11:19 PM

I doubt its the pulleys themselves. And I wouldnt recommend aftermarkey "performance" pulleys either.
Change the belts like you know you have to, adjust the idle adjust screw and clean the iacv on the back of the intake mani. Those will make it so the idle doesnt drop lower than its supposed to. You should do that anyways.

As far as the sound...is it like a metallic squeal?

09-24-2004, 01:13 AM

yea kinda, its a wierd sound, its like the squeal the belts make except its more faint and metallic like you said, and only occurs when the idle drops.

*pdiggitydogg* · 09-24-2004, 02:11 AM

well I suggest checking belt tension, water pump, worn bearings...but only after you change the belts and its still there. You should chage the water pump at the same time anyways

Civic_RedLine · 09-24-2004, 03:43 AM

squeeking sounds could mean the belts. I was told to watch out of squeeking sounds when any belts are changed by a mechanic. However I installed the pulleys right and got no squeeling sounds from the belt.

09-24-2004, 04:40 AM

Yea I know I probably need to replace my belt because it squeaks especially when it rains, and its real tight. I was used to that sound thats why I was concerned when I started to hear the metallic sound. But I will have the belt and water pump changed and hopefully that will clear it up, thanks.

09-23-2004, 09:30 PM	#1
Victorystardrop Posts: n/a	Could it be the pulleys? Well after I had my intake and headers put on my car has been idling a little low, so now when I come to a stop at a red light or whatever it drops to .5k rpms and lower and I can hear what sounds like a metalic high pitch rubbing sort of noise, now I know I need to replace my belts because they squeek every so often but this sound comes from the same area, but its not the belts. Now if I give it a little gas to around 1k the noise fades away. So if it is the pulleys I would rather just replace them with aftermarket ones instead of just turning up the idle so I cant hear it anymore. Any suggestions or opinions on the problem would be great.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-23-2004, 11:19 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	I doubt its the pulleys themselves. And I wouldnt recommend aftermarkey "performance" pulleys either. Change the belts like you know you have to, adjust the idle adjust screw and clean the iacv on the back of the intake mani. Those will make it so the idle doesnt drop lower than its supposed to. You should do that anyways. As far as the sound...is it like a metallic squeal?

09-24-2004, 01:13 AM	#3
Victorystardrop Posts: n/a	yea kinda, its a wierd sound, its like the squeal the belts make except its more faint and metallic like you said, and only occurs when the idle drops.

09-24-2004, 02:11 AM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	well I suggest checking belt tension, water pump, worn bearings...but only after you change the belts and its still there. You should chage the water pump at the same time anyways

09-24-2004, 03:43 AM	#5
Civic_RedLine 3rd Gear Join Date: Jul 2004 Location: Los Angeles Posts: 352	squeeking sounds could mean the belts. I was told to watch out of squeeking sounds when any belts are changed by a mechanic. However I installed the pulleys right and got no squeeling sounds from the belt.

09-24-2004, 04:40 AM	#6
Victorystardrop Posts: n/a	Yea I know I probably need to replace my belt because it squeaks especially when it rains, and its real tight. I was used to that sound thats why I was concerned when I started to hear the metallic sound. But I will have the belt and water pump changed and hopefully that will clear it up, thanks.