.:HSTuners::

05-25-2003, 04:05 PM

I wanted to buy an AEM underdrive pulley system for my D15B7, but they don't make it for that engine. Is there a system for another engine that would be interchangable with my engine? If not is there away to make it fit? Does this system really make a big difference in torque/hp?

*AzCivic* · 05-25-2003, 08:26 PM

i would think they would be interchangeable, but i'm not sure. your best bet would be to call AEM and ask them.

as to whether or not its a difference, some say yes, and some say theyre a waste. So, I'd say the increase isnt much or there would be alot more talk about them.

05-26-2003, 10:33 AM

What do they say it is intended to do?

ebpda9 · 05-26-2003, 11:37 AM

the most noticeable thing from them is the eye candy

05-26-2003, 12:45 PM

So I shouldn't waste the money? Do the AEM cam gears do anything? On this forum or another somebody told me an adjustable cam gear will give you 20 horses if it's tuned right. Is this true?

a96710 · 05-26-2003, 12:58 PM

You should do upgraded cams with adjustable cam gears to get the full benefit

*AzCivic* · 05-26-2003, 02:55 PM

you will not really get a gain with the cam gear. what you can do with it is mess around with the power band a little, so you can gain some low end at the expense of top end and visa versa. If you upgrade the cam at the same time, even better, you'll gain power across the board and then you can play with the power band again and put the power where you want it.

*AzCivic* · 05-26-2003, 02:56 PM

BTW you only have one cam so you'll only need one cam gear and one upgraded cam.

05-25-2003, 04:05 PM	#1
goatnipples2002 Posts: n/a	Will the pulley system fit I wanted to buy an AEM underdrive pulley system for my D15B7, but they don't make it for that engine. Is there a system for another engine that would be interchangable with my engine? If not is there away to make it fit? Does this system really make a big difference in torque/hp?

05-26-2003, 11:37 AM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	the most noticeable thing from them is the eye candy __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-25-2003, 08:26 PM	#2
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	i would think they would be interchangeable, but i'm not sure. your best bet would be to call AEM and ask them. as to whether or not its a difference, some say yes, and some say theyre a waste. So, I'd say the increase isnt much or there would be alot more talk about them.

05-26-2003, 10:33 AM	#3
goatnipples2002 Posts: n/a	What do they say it is intended to do?

05-26-2003, 12:45 PM	#5
goatnipples2002 Posts: n/a	So I shouldn't waste the money? Do the AEM cam gears do anything? On this forum or another somebody told me an adjustable cam gear will give you 20 horses if it's tuned right. Is this true?

05-26-2003, 12:58 PM	#6
a96710 Registered User Join Date: Oct 2002 Location: Vancouver, Wa Age: 43 Posts: 1,454	You should do upgraded cams with adjustable cam gears to get the full benefit

05-26-2003, 02:55 PM	#7
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	you will not really get a gain with the cam gear. what you can do with it is mess around with the power band a little, so you can gain some low end at the expense of top end and visa versa. If you upgrade the cam at the same time, even better, you'll gain power across the board and then you can play with the power band again and put the power where you want it.

05-26-2003, 02:56 PM	#8
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	BTW you only have one cam so you'll only need one cam gear and one upgraded cam.