.:HSTuners::

AkimboStylee · 11-05-2005, 12:43 AM

alright here is a little insight on Projekt-ef/9

I don't plan on making impressive #'s with any set up but i have a few questions.

I plan doing a simple 75 shot of nitrous at first and later on increase the jets to a 125 shot and probably s.c or turbo later.

1.) What would be a good price and place of purchase for a b16 (usdm not jdm)?

2.) What would you guys recomend for building up the internals( parts/brands/ place of purchase)?

3.) Suspension?

any input would be helpful, plus if i need of anything else what would i need? (besides a couple of extra hands and a few (4+) cases of beer)

Peace out!

IALuder · 11-05-2005, 01:24 PM

1) HMotorsonline.com only place to buy usdm or jdm motors for reasonable prices.
2a) i would upgrade pistons rods rings. i think a stock head would work with just a 75 shot.

2b)Crower, JE, Golden Eagle are the one i have been looking at lately

2c) i dont know. check their website for wholesale dealers

3) GC and Koni yellows. best damn set up i have had. also get the ST bushing kit. also a very a good buy. stiffer then shit, but yet streetable.

AkimboStylee · 11-05-2005, 05:24 PM

cool thanks, i just stripped the interior ready for the seat and rails to be delivered, alos waiting on various CF pieces( Hood, Cargo cover, and Hatch (had to get the hatch custom made, but it will be worth it) )

Mischief · 11-05-2005, 05:54 PM

I want pics before, during install and after!!

*AzCivic* · 11-05-2005, 06:11 PM

if you want to really get into nitrous, new pistons and rods like mentioned are a good upgrade as well as SS valves that can take the extra heat. if you're really planning on running up to a 125shot, which you could easily do on a good build, i'd suggest a Direct Port setup by NX, they also make that NXL thing exclusivly for b16's/type R intake mani's which is an easier to install direct port setup. Don't know how good it is though. or if you want to save time and money you could get away w/ the regular wet kit for upto a 125shot.

MissJDM · 11-06-2005, 02:47 AM

1) HMotorsonline.com, as mentioned above for reasonable prices / complete swaps.

2) Eagle Rods: dependable, durable, cost efficient. You shouldn't have a problem locating these. No more than $300?
JE or CP Pistons: 9:1 - 9.5:1 is what I would suggest for your specific set up.
High temperature valves to handle the extra heat is definitely a good point mentioned above.
Possibly a good high flow intake manifold
Bigger injectors, if you plan on higher shots of nitrous. My boyfriend had a JDM B16a CRX a few years ago with a Type R intake manifold and throttle body, DC 4-2-1 header, exhaust, intake and a 75 shot of nitrous and ran 14.0 - 14.1's consistantly. You shouldn't have problems running that with an EF9. Not quick, but nice enough for a limited amount of mods.
Have a fuel pressure regulator!

3) I agree with Ben on the ST Bushing kit. Look into KYB adjustables also. They're 16 way adjustable and have a pretty reasonable price. Or you can try a really nice suspension kit and get Tein or D2 suspension if you're looking to spend more money.

Mischief · 11-06-2005, 11:15 AM

Quote:

Originally posted by MissJDM
1) HMotorsonline.com, as mentioned above for reasonable prices / complete swaps.

2) Eagle Rods: dependable, durable, cost efficient. You shouldn't have a problem locating these. No more than $300?
JE or CP Pistons: 9:1 - 9.5:1 is what I would suggest for your specific set up.
High temperature valves to handle the extra heat is definitely a good point mentioned above.
Possibly a good high flow intake manifold
Bigger injectors, if you plan on higher shots of nitrous. My boyfriend had a JDM B16a CRX a few years ago with a Type R intake manifold and throttle body, DC 4-2-1 header, exhaust, intake and a 75 shot of nitrous and ran 14.0 - 14.1's consistantly. You shouldn't have problems running that with an EF9. Not quick, but nice enough for a limited amount of mods.
Have a fuel pressure regulator!

3) I agree with Ben on the ST Bushing kit. Look into KYB adjustables also. They're 16 way adjustable and have a pretty reasonable price. Or you can try a really nice suspension kit and get Tein or D2 suspension if you're looking to spend more money.

that's so hot

*AzCivic* · 11-06-2005, 12:22 PM

if its a wet shot/direct port, bigger injectors are not needed, the extra fuel is provided through the nozzle/s which is fed by its own solenoid which is tee'd off from a fuel line.

11-05-2005, 12:43 AM	#1
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	I think this belongs here..... alright here is a little insight on Projekt-ef/9 I don't plan on making impressive #'s with any set up but i have a few questions. I plan doing a simple 75 shot of nitrous at first and later on increase the jets to a 125 shot and probably s.c or turbo later. 1.) What would be a good price and place of purchase for a b16 (usdm not jdm)? 2.) What would you guys recomend for building up the internals( parts/brands/ place of purchase)? 3.) Suspension? any input would be helpful, plus if i need of anything else what would i need? (besides a couple of extra hands and a few (4+) cases of beer) Peace out! __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

11-05-2005, 01:24 PM	#2
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	1) HMotorsonline.com only place to buy usdm or jdm motors for reasonable prices. 2a) i would upgrade pistons rods rings. i think a stock head would work with just a 75 shot. 2b)Crower, JE, Golden Eagle are the one i have been looking at lately 2c) i dont know. check their website for wholesale dealers 3) GC and Koni yellows. best damn set up i have had. also get the ST bushing kit. also a very a good buy. stiffer then shit, but yet streetable. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

11-05-2005, 05:24 PM	#3
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	cool thanks, i just stripped the interior ready for the seat and rails to be delivered, alos waiting on various CF pieces( Hood, Cargo cover, and Hatch (had to get the hatch custom made, but it will be worth it) ) __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

11-06-2005, 02:47 AM	#6
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	1) HMotorsonline.com, as mentioned above for reasonable prices / complete swaps. 2) Eagle Rods: dependable, durable, cost efficient. You shouldn't have a problem locating these. No more than $300? JE or CP Pistons: 9:1 - 9.5:1 is what I would suggest for your specific set up. High temperature valves to handle the extra heat is definitely a good point mentioned above. Possibly a good high flow intake manifold Bigger injectors, if you plan on higher shots of nitrous. My boyfriend had a JDM B16a CRX a few years ago with a Type R intake manifold and throttle body, DC 4-2-1 header, exhaust, intake and a 75 shot of nitrous and ran 14.0 - 14.1's consistantly. You shouldn't have problems running that with an EF9. Not quick, but nice enough for a limited amount of mods. Have a fuel pressure regulator! 3) I agree with Ben on the ST Bushing kit. Look into KYB adjustables also. They're 16 way adjustable and have a pretty reasonable price. Or you can try a really nice suspension kit and get Tein or D2 suspension if you're looking to spend more money. __________________ you say it best when you say nothing at all

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-05-2005, 06:11 PM	#5
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	if you want to really get into nitrous, new pistons and rods like mentioned are a good upgrade as well as SS valves that can take the extra heat. if you're really planning on running up to a 125shot, which you could easily do on a good build, i'd suggest a Direct Port setup by NX, they also make that NXL thing exclusivly for b16's/type R intake mani's which is an easier to install direct port setup. Don't know how good it is though. or if you want to save time and money you could get away w/ the regular wet kit for upto a 125shot.

11-06-2005, 12:22 PM	#8
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	if its a wet shot/direct port, bigger injectors are not needed, the extra fuel is provided through the nozzle/s which is fed by its own solenoid which is tee'd off from a fuel line.