.:HSTuners::

Racing Rice · 07-10-2008, 02:14 PM

This is what I've been up to.. I've been drooling over an old skool bike for a while. It's a 1978 Yamaha XS650. I ran across this little beauty for $100 from a guy on one of the motorcycle forums I frequent. It doesn't have a title, and doesn't run at the moment. The owner before the guy I bought it from pulled out the wiring harness so all of the electrical pieces are sitting in a box. I'm going to weld in a hardtail section. I already bought a '68 Sportster tank from someone I work with. Hopefully this this is going to be the shit when get it finish (which won't be anytime soon I'm sure.) I picked up a '82 titled frame for it on Sunday..

There were some ghetto home made hardtail struts in the box. This removes that stock shocks and lowers the rear of the bike. This is just temporary until I get hardtail section welded onto the new frame. I also installed a set of dirtbike bars I had laying around the garage. I'm going to get a new pair that won't hang down quite as low for the final assembly.

Here it is with the sportster tank.

btw, the schwinn seat is temporary.

I ordered a bunch more parts for it Tuesday. Just waiting for them to come in.

2000Pimpinex · 07-10-2008, 07:45 PM

That will be a sweet ride when its finished. Good luck with the build and keep us updated.

Racing Rice · 07-10-2008, 10:15 PM

I definitely will thanks man!

Here are a few more pics I uploaded today.

Some more pics.. I'm grinding off the stock tank mounts for the tank to fit the frame..

XS650 Guard dog..

Tank mounted.. May grind alittle more out so that it sits further down. It's on there tight right now..

Racing Rice · 07-13-2008, 11:39 AM

I got my hardtail tacked into place last night. Obviously the hardest part was making sure everything was square. We still need to finish welding everything up once I get the rest of the parts that I need to weld.

The TC Bros Choppers hardtail section is nice. The fit was very good. It came with instruction that were ok. The installation wasn't over difficult. I still have to go back and clean up the stock part of the frame and clean up the tack welds that we use to hold the frame in place since there was no motor in it.

2000Pimpinex · 07-13-2008, 04:52 PM

Looking good.

acurastylin · 07-14-2008, 06:00 PM

Nice progress.

Racing Rice · 09-22-2008, 11:27 AM

Here are some updated pics since I haven't posted any in a while.

Got some more stuff mounted. It's nice having a welder now.

I like this stance.. Sits pretty comfy.

Got the seat mounted.

Battery box rails mounted.

Playing with an old pair of bmx bars. I really like these. I flipped them over and cut the C off. Just have to plug the holes with something. These are just test bars, they are a little tweaked from riding BMX.

*ChrisCantSkate* · 09-27-2008, 12:03 PM

looks fuckin cool man. i need a good project again.

thermal · 09-28-2008, 08:30 PM

fuckin' sweet man... I love fabrication projects.....

Racing Rice · 09-30-2008, 02:58 PM

I've been taking welding classes on Tuesday nights. Still have a lot of learning to do, but my welds see to be really strong. So that's a plus. lol It's fun building something with your hands. Makes you appreciate it more. So far I have about $800 or $900 in this.

Chris did you ever finish your guitar?

07-10-2008, 02:14 PM	#1
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	Building a Bobber.. This is what I've been up to.. I've been drooling over an old skool bike for a while. It's a 1978 Yamaha XS650. I ran across this little beauty for $100 from a guy on one of the motorcycle forums I frequent. It doesn't have a title, and doesn't run at the moment. The owner before the guy I bought it from pulled out the wiring harness so all of the electrical pieces are sitting in a box. I'm going to weld in a hardtail section. I already bought a '68 Sportster tank from someone I work with. Hopefully this this is going to be the shit when get it finish (which won't be anytime soon I'm sure.) I picked up a '82 titled frame for it on Sunday.. There were some ghetto home made hardtail struts in the box. This removes that stock shocks and lowers the rear of the bike. This is just temporary until I get hardtail section welded onto the new frame. I also installed a set of dirtbike bars I had laying around the garage. I'm going to get a new pair that won't hang down quite as low for the final assembly. Here it is with the sportster tank. btw, the schwinn seat is temporary. I ordered a bunch more parts for it Tuesday. Just waiting for them to come in. __________________ Racing Rice

07-10-2008, 07:45 PM	#2
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	That will be a sweet ride when its finished. Good luck with the build and keep us updated. __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

07-10-2008, 10:15 PM	#3
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	I definitely will thanks man! Here are a few more pics I uploaded today. Some more pics.. I'm grinding off the stock tank mounts for the tank to fit the frame.. XS650 Guard dog.. Tank mounted.. May grind alittle more out so that it sits further down. It's on there tight right now.. __________________ Racing Rice

07-13-2008, 11:39 AM	#4
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	I got my hardtail tacked into place last night. Obviously the hardest part was making sure everything was square. We still need to finish welding everything up once I get the rest of the parts that I need to weld. The TC Bros Choppers hardtail section is nice. The fit was very good. It came with instruction that were ok. The installation wasn't over difficult. I still have to go back and clean up the stock part of the frame and clean up the tack welds that we use to hold the frame in place since there was no motor in it. __________________ Racing Rice

07-13-2008, 04:52 PM	#5
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	Looking good. __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

07-14-2008, 06:00 PM	#6
acurastylin Registered User Join Date: Jul 2008 Posts: 5	Nice progress.

09-22-2008, 11:27 AM	#7
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	Here are some updated pics since I haven't posted any in a while. Got some more stuff mounted. It's nice having a welder now. I like this stance.. Sits pretty comfy. Got the seat mounted. Battery box rails mounted. Playing with an old pair of bmx bars. I really like these. I flipped them over and cut the C off. Just have to plug the holes with something. These are just test bars, they are a little tweaked from riding BMX. __________________ Racing Rice

09-27-2008, 12:03 PM	#8
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	looks fuckin cool man. i need a good project again. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

09-28-2008, 08:30 PM	#9
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	fuckin' sweet man... I love fabrication projects..... __________________ Project Teg Visit the Turbo Forum

09-30-2008, 02:58 PM	#10
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	I've been taking welding classes on Tuesday nights. Still have a lot of learning to do, but my welds see to be really strong. So that's a plus. lol It's fun building something with your hands. Makes you appreciate it more. So far I have about $800 or $900 in this. Chris did you ever finish your guitar? __________________ Racing Rice

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode