.:HSTuners::

*pdiggitydogg* · 04-20-2003, 09:30 AM

Bored on Easter morning, waiting to go to dinner/lunch, I was doin some research on the Comptech Ice Box, when I came across this little tid-bit.
--
Its a diy ice box for 'tegs (But could easily be done on anything). no more worries about hydrolock w/ standard cai's.

DIY Ice Box

Looks like a piece o' cake job and could easily be done in less than 1 day.

So, if youve still got a stock intake, try this out...just get a k&n filter so the flow is better)

Yeah, lots of people probably already know about this, but I figured I'd share anyway.
(I posted in here because it gets the most traffic...)

ebpda9 · 04-20-2003, 09:35 AM

same piping that carries my shit to the sewer

nonovurbizniz · 04-21-2003, 12:09 AM

that piping is NOT safe for use in engine bays... the pvc vaporizes inside the tube and it lines your engine DO NOT DO THIS MOD.. with pvc at least...

Duckydos · 04-21-2003, 12:16 AM

Agreed! PVC starts to break down under heat conditions and releases poisen gasses. I would think that the filter would do it's job, but why risk it?
You can buy some metal clothes-dryer tubing from any hardware store. It is flexible and bendable and you can use that to direct air into your airbox. Probably cheaper then that PVC as well...

-Ducky

04-21-2003, 10:53 AM

Quote:

Originally posted by hondaman-iac
same piping that carries my shit to the sewer

HA lmfao..

**ghetto fabulous**

*pdiggitydogg* · 04-21-2003, 11:14 AM

no, I wouldnt use pvc either.

I'd use 180 degree bent aluminum piping like they use in the teamdelsol DIY for cai...or high temp plastics

04-20-2003, 09:30 AM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	DIY ice box Bored on Easter morning, waiting to go to dinner/lunch, I was doin some research on the Comptech Ice Box, when I came across this little tid-bit. -- Its a diy ice box for 'tegs (But could easily be done on anything). no more worries about hydrolock w/ standard cai's. DIY Ice Box Looks like a piece o' cake job and could easily be done in less than 1 day. So, if youve still got a stock intake, try this out...just get a k&n filter so the flow is better) Yeah, lots of people probably already know about this, but I figured I'd share anyway. (I posted in here because it gets the most traffic...)

04-20-2003, 09:35 AM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	same piping that carries my shit to the sewer __________________

04-21-2003, 12:09 AM	#3
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	that piping is NOT safe for use in engine bays... the pvc vaporizes inside the tube and it lines your engine DO NOT DO THIS MOD.. with pvc at least... __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

04-21-2003, 12:16 AM	#4
Duckydos Registered User Join Date: Mar 2003 Location: Orlando, FL Age: 41 Posts: 1,048	Agreed! PVC starts to break down under heat conditions and releases poisen gasses. I would think that the filter would do it's job, but why risk it? You can buy some metal clothes-dryer tubing from any hardware store. It is flexible and bendable and you can use that to direct air into your airbox. Probably cheaper then that PVC as well... -Ducky __________________ Had an Accord. Then I had something European. Now I have an SCCA Solo-II monster!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-21-2003, 11:14 AM	#6
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	no, I wouldnt use pvc either. I'd use 180 degree bent aluminum piping like they use in the teamdelsol DIY for cai...or high temp plastics