.:HSTuners::

01-05-2003, 02:52 AM

what would be best in a 94 civic hb in a drag race?

ebpda9 · 01-05-2003, 03:20 AM

h22 but it's a real pain in the rear just to fit there. if u want your car to be driveable on the street too go with a b18

01-05-2003, 10:19 PM

I heard the h22 is a easy swap for the hb this site:
www.performancesupply.com

01-05-2003, 11:03 PM

Quote:

Originally posted by smokencivic
I heard the h22 is a easy swap for the hb this site:
www.performancesupply.com

It may fit, but remember that the h22 is a lot heavier than the b18. Your hatchie will be a LOT harder to steer. So it is great for drag racing, but really impractical for street driving.

TeriyakiBroccoli · 01-05-2003, 11:18 PM

It says its a moderate swap. How impractical is impractical? I would be driving granny/normal style on the road, I wouldn't need anything that sticks to the road taking a 90 degree sharp turn at 100 mph.

I'd want as much straight line power as possible.

smokencivic, I plan to do an engine swap on a 6G civic, keep in touch, and we can help each other out

01-06-2003, 12:02 AM

Quote:

Originally posted by TeriyakiBroccoli
It says its a moderate swap. How impractical is impractical? I would be driving granny/normal style on the road, I wouldn't need anything that sticks to the road taking a 90 degree sharp turn at 100 mph.

I'd want as much straight line power as possible.

I don't know anyone who had done it, so I can't tell you for sure how bad the handling will be. But several people have mentioned this on other sites, and the reaction there is the same. BAAAAAD handling.

slowEJ6 · 01-09-2003, 10:24 PM

yeah its bad handling if you just swap in an H22A and leave it with stock suspension components. thats just plain idiotic.

stiffer spring rates and sport tuned shocks/coilovers are a good idea and add some suspension beef up components like a thick rear sway-bar - you can easily have VERY good handling.

id rather have the B18C5 though. the H22A isnt the greatest just because it has a lot more tq.

01-10-2003, 01:54 PM

B18C5 all the way. much lighter and faster engine. Trust Me

silver · 01-10-2003, 02:00 PM

don't go h22, too expensive, too deadly. You will not be able to do anything in terms of turning. Your turning response will drop, just trying to dodge something will be difficult.

slowEJ6 · 01-12-2003, 06:31 PM

its not that expensive....will cost about the same as a b18c5 swap.

its not deadly.

you can turn.

01-14-2003, 01:49 AM

well I seen the h22a for way cheaper then b18c5.but yeah the b18c5 is the way to go or maybe b18c1 "gsr"

drdingo21 · 01-14-2003, 06:44 PM

the h22 will be a little bit cheaper than the b18c5. But when if you do the h22, you will need to buy new motor mounts ($600), Have custom axels made because all the torque and hp of the h22 will snap the ones you have now. You will lose powersterring and your A/C, if you throw extra money in then you can keep one or the other. the h22 is considerbly heavier, so you will need to upgrade you suspension to have any kind of decent handling, and trying to get rid of the understeer.

I was thinking about the same swap myself. And i will be doing the b18c swap, because i will be driving the car all the time on the road. I decided to just do a b18 and then later use forced induction.

01-18-2003, 09:33 PM

if the car is built for it the h22 then id imagine itd be fine, if your daily driving, id take the b18.

01-05-2003, 03:20 AM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	h22 but it's a real pain in the rear just to fit there. if u want your car to be driveable on the street too go with a b18 __________________

01-05-2003, 11:18 PM	#5
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 39 Posts: 1,490	It says its a moderate swap. How impractical is impractical? I would be driving granny/normal style on the road, I wouldn't need anything that sticks to the road taking a 90 degree sharp turn at 100 mph. I'd want as much straight line power as possible. smokencivic, I plan to do an engine swap on a 6G civic, keep in touch, and we can help each other out __________________ everyone loves the turbizzim.

01-10-2003, 02:00 PM	#9
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 43 Posts: 820	don't go h22, too expensive, too deadly. You will not be able to do anything in terms of turning. Your turning response will drop, just trying to dodge something will be difficult. __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-05-2003, 10:19 PM	#3
smokencivic Posts: n/a	I heard the h22 is a easy swap for the hb this site: www.performancesupply.com

01-09-2003, 10:24 PM	#7
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	yeah its bad handling if you just swap in an H22A and leave it with stock suspension components. thats just plain idiotic. stiffer spring rates and sport tuned shocks/coilovers are a good idea and add some suspension beef up components like a thick rear sway-bar - you can easily have VERY good handling. id rather have the B18C5 though. the H22A isnt the greatest just because it has a lot more tq.

01-10-2003, 01:54 PM	#8
PooH DiGGLianO Posts: n/a	B18C5 all the way. much lighter and faster engine. Trust Me

01-12-2003, 06:31 PM	#10
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	its not that expensive....will cost about the same as a b18c5 swap. its not deadly. you can turn.

01-14-2003, 01:49 AM	#11
racerus Posts: n/a	well I seen the h22a for way cheaper then b18c5.but yeah the b18c5 is the way to go or maybe b18c1 "gsr"

01-14-2003, 06:44 PM	#12
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 41 Posts: 1,642	the h22 will be a little bit cheaper than the b18c5. But when if you do the h22, you will need to buy new motor mounts ($600), Have custom axels made because all the torque and hp of the h22 will snap the ones you have now. You will lose powersterring and your A/C, if you throw extra money in then you can keep one or the other. the h22 is considerbly heavier, so you will need to upgrade you suspension to have any kind of decent handling, and trying to get rid of the understeer. I was thinking about the same swap myself. And i will be doing the b18c swap, because i will be driving the car all the time on the road. I decided to just do a b18 and then later use forced induction.

01-18-2003, 09:33 PM	#13
02CiviC Posts: n/a	if the car is built for it the h22 then id imagine itd be fine, if your daily driving, id take the b18.