.:HSTuners::

IALuder · 04-03-2006, 06:09 PM

so i finally got the money and drop off my h23 spare block. its getting bored to 89mm and cleaned. then having Oil squirts installed for safer high rpm driving.

i also got another small 2K loan and bought the following:

ACL Bearings
MAhley Turbo Tough Rods
Wiesco Pistons
Cometic Headgasket .41
ann all new OEM parts to complete block: Oil pump, timing belt, water pump and piping ect...

i get the block back in 2 weeks. cant wait at all.

now to find a decent head.

IALuder · 04-10-2006, 02:54 AM

good news. i get my block back in 2 weeks from the shop.

i also just order ARP studs.

*pdiggitydogg* · 04-10-2006, 08:46 AM

lookin awesome man, glad to hear its moving along!

IALuder · 06-13-2006, 07:29 PM

well pics are coming of the assembly and parts.

i also pick uped a kaizenspeed balance shaft removal kit, arp bolt kit.

IALuder · 06-27-2006, 11:33 PM

its in full swing bitches:

the block has been bored to 89mm, clean, and milled the surface was rough.

the oil squirts which i have to custom install. the h23 block didnt come with these stock.

the wiseco pistons 89mm off the shelf pistons:

IALuder · 06-27-2006, 11:36 PM

the balance shaft removal kit, made by kaizen speed.

arp head bolts and the girdle freshly cleaned:

unorthadox racing underdrive pully

the manley turbo tough rods with arp bolts included:

IALuder · 06-27-2006, 11:37 PM

and finally the oil pan custom bunged for that GT35R that i havent bought yet:

i will began to work on this after i get my crank back from cleaning + balancing. i also need my ACL bearing which will be here friday.

thermal · 06-28-2006, 07:22 AM

good shit

*ChrisCantSkate* · 06-28-2006, 10:39 AM

looking good man. im glad your doing it right, ive seen too many people try and slap the h22 head on the h23 block with no other work... dosnt work well. im glad to see some h-loving still out there

IALuder · 06-28-2006, 05:35 PM

yea, i love the H hybrid. im think all crower head work. stage 2 camshafts, cams, vavles, retainers

IALuder · 06-29-2006, 10:10 PM

people are telling me to paint the block...but whats the point in doing that?

*pdiggitydogg* · 07-02-2006, 01:30 PM

i could see a ceramic paint retaining a little heat (?)

IALuder · 07-02-2006, 03:44 PM

if thats all it will do, screw that. look at the BLING

IALuder · 07-18-2006, 11:14 PM

just purchased:

Gude Bored and port matched throttle body/IM chamber 67mm to 63mm instead of 60mm to 56mm. This will bolt right in on an H23 or it will require mounting a map sensor on the firewall if you want to use this with an H22 (like I did). I can include one for a little extra. Also includes brand new OEM TB gasket. I don't know if this will work with a 5th gen because a local guy tried to use it and he had a hunting idle and a CEL for the Intake Air Temp sensor (which is on the runners, not the IM chamber). I never got to look at it before he put his old one back on. $150shipped

i plan to port it out to euro R size.

IALuder · 07-22-2006, 11:10 PM

well time to take out the old.

it threw a couple of rods. so i had to buy the civic to get the lude running. but i might keep the civic for shits n giggles.

but here is the progress we made.

*AzCivic* · 07-23-2006, 01:54 AM

man you must have alot of money to blow. good luck.

IALuder · 07-23-2006, 11:00 AM

actually this lude isnt going to see much work for the next couple of months.

IALuder · 07-30-2006, 05:57 PM

up DATE!

check out the chunk of the motor missing

IALuder · 08-13-2006, 03:48 PM

well now i have run into some small snags. the car will be worked on over winter while i save up a huge budge and pay off the DD.

but we did manage to get half of the interior work done with my small pocket change!!!

before:

dry ice time. to get the sound deading shit out. it work amazing. 7 1/2 pounds of dry ice to remove 15lbs of tar...

primer:

paint:

AkimboStylee · 08-14-2006, 06:57 AM

Looking good

IALuder · 08-15-2006, 01:53 AM

thanks, it was all done with rattle can. the paint and primer only coest me 24.67. hahahahah.

IALuder · 11-27-2006, 03:16 PM

even tho i know only two people will look at this and only one will reply i figured ill let those of whom care know more about my progress.

little bit of an update for those interested. i got my h22a head back from blacktrax in cali. it is used so its not all shinny and shit. plus my str cams.

pictures:

my collection of shit:

AkimboStylee · 12-01-2006, 11:11 AM

thing is going to be a beast!!!!

IALuder · 01-12-2007, 02:37 PM

well i just got my Hondata IM gasket, Skunk2 manifold, BDL fuel rail, RC 1600 CC injectors.

IALuder · 03-17-2007, 03:06 PM

got some more goodies!

IALuder · 04-10-2007, 10:38 PM

i got a F22a4 tranny today. ill pictures up later

Racing Rice · 06-27-2007, 09:05 AM

Wow man, nice project! I can't wait to see this thing when you get done. It sounds like it's coming along nicely.

IALuder · 06-29-2007, 01:04 AM

sometime i wish it was done. im tired of building it already.

2000Pimpinex · 07-12-2008, 10:08 AM

Any updates? Is it done yet?

04-03-2006, 06:09 PM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	H23Vtec commences so i finally got the money and drop off my h23 spare block. its getting bored to 89mm and cleaned. then having Oil squirts installed for safer high rpm driving. i also got another small 2K loan and bought the following: ACL Bearings MAhley Turbo Tough Rods Wiesco Pistons Cometic Headgasket .41 ann all new OEM parts to complete block: Oil pump, timing belt, water pump and piping ect... i get the block back in 2 weeks. cant wait at all. now to find a decent head. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

04-10-2006, 02:54 AM	#2
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	good news. i get my block back in 2 weeks from the shop. i also just order ARP studs. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-13-2006, 07:29 PM	#4
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	well pics are coming of the assembly and parts. i also pick uped a kaizenspeed balance shaft removal kit, arp bolt kit. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-27-2006, 11:33 PM	#5
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	its in full swing bitches: the block has been bored to 89mm, clean, and milled the surface was rough. the oil squirts which i have to custom install. the h23 block didnt come with these stock. the wiseco pistons 89mm off the shelf pistons: __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-27-2006, 11:36 PM	#6
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	the balance shaft removal kit, made by kaizen speed. arp head bolts and the girdle freshly cleaned: unorthadox racing underdrive pully the manley turbo tough rods with arp bolts included: __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

04-10-2006, 08:46 AM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	lookin awesome man, glad to hear its moving along!

06-27-2006, 11:37 PM	#7
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	and finally the oil pan custom bunged for that GT35R that i havent bought yet: i will began to work on this after i get my crank back from cleaning + balancing. i also need my ACL bearing which will be here friday. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-28-2006, 07:22 AM	#8
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	good shit __________________ Project Teg Visit the Turbo Forum

06-28-2006, 10:39 AM	#9
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	looking good man. im glad your doing it right, ive seen too many people try and slap the h22 head on the h23 block with no other work... dosnt work well. im glad to see some h-loving still out there __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

06-28-2006, 05:35 PM	#10
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	yea, i love the H hybrid. im think all crower head work. stage 2 camshafts, cams, vavles, retainers __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-29-2006, 10:10 PM	#11
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	people are telling me to paint the block...but whats the point in doing that? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

07-02-2006, 01:30 PM	#12
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	i could see a ceramic paint retaining a little heat (?)

07-02-2006, 03:44 PM	#13
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	if thats all it will do, screw that. look at the BLING __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

07-18-2006, 11:14 PM	#14
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	just purchased: Gude Bored and port matched throttle body/IM chamber 67mm to 63mm instead of 60mm to 56mm. This will bolt right in on an H23 or it will require mounting a map sensor on the firewall if you want to use this with an H22 (like I did). I can include one for a little extra. Also includes brand new OEM TB gasket. I don't know if this will work with a 5th gen because a local guy tried to use it and he had a hunting idle and a CEL for the Intake Air Temp sensor (which is on the runners, not the IM chamber). I never got to look at it before he put his old one back on. $150shipped i plan to port it out to euro R size. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

07-22-2006, 11:10 PM	#15
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	well time to take out the old. it threw a couple of rods. so i had to buy the civic to get the lude running. but i might keep the civic for shits n giggles. but here is the progress we made. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

07-23-2006, 01:54 AM	#16
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	man you must have alot of money to blow. good luck.

07-23-2006, 11:00 AM	#17
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	actually this lude isnt going to see much work for the next couple of months. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

07-30-2006, 05:57 PM	#18
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	up DATE! check out the chunk of the motor missing __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

08-13-2006, 03:48 PM	#19
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	well now i have run into some small snags. the car will be worked on over winter while i save up a huge budge and pay off the DD. but we did manage to get half of the interior work done with my small pocket change!!! before: dry ice time. to get the sound deading shit out. it work amazing. 7 1/2 pounds of dry ice to remove 15lbs of tar... primer: paint: __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit. Last edited by IALuder : 08-15-2006 at 01:52 AM.

08-14-2006, 06:57 AM	#20
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	Looking good __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

08-15-2006, 01:53 AM	#21
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	thanks, it was all done with rattle can. the paint and primer only coest me 24.67. hahahahah. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

11-27-2006, 03:16 PM	#22
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	even tho i know only two people will look at this and only one will reply i figured ill let those of whom care know more about my progress. little bit of an update for those interested. i got my h22a head back from blacktrax in cali. it is used so its not all shinny and shit. plus my str cams. pictures: my collection of shit: __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-01-2006, 11:11 AM	#23
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	thing is going to be a beast!!!! __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

01-12-2007, 02:37 PM	#24
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	well i just got my Hondata IM gasket, Skunk2 manifold, BDL fuel rail, RC 1600 CC injectors. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

03-17-2007, 03:06 PM	#25
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	got some more goodies! __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

04-10-2007, 10:38 PM	#26
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	i got a F22a4 tranny today. ill pictures up later __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

06-27-2007, 09:05 AM	#27
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	Wow man, nice project! I can't wait to see this thing when you get done. It sounds like it's coming along nicely. __________________ Racing Rice

06-29-2007, 01:04 AM	#28
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	sometime i wish it was done. im tired of building it already. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

07-12-2008, 10:08 AM	#29
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	Any updates? Is it done yet? __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode