.:HSTuners::

IALuder · 04-29-2005, 04:19 PM

im looking into going NA with my H22a LSD swap thats going to happen in augest.

while i have the motor out im thinking of doning a crower stroker kit. anyone seen a h22 done with this kit? anyone buy this? or think of this?

i hear it bores the H22 to 2.5L.

*ChrisCantSkate* · 04-30-2005, 12:06 AM

yeah im pretty sure its a 2.5 or 2.6 even. i dunno though, the rod stroke ratio is pretty good on a h22, i think theres a better way to spend the money in the motor to get more power, even all motor.

IALuder · 04-30-2005, 12:46 AM

i was going NA, but i figured i get a stroker. just to see how much power a h22 can handle with it.

*ChrisCantSkate* · 04-30-2005, 02:02 AM

i remeber something about destroking it to a 2.0... dont remeber the details, i think it had a "safe" 9k redline and made real good power all the way through. im sure theres info about it somewhere.

edit:

i did some reading.. it you loose more low tq for the higher redline, basically turns it into a f20b motor. i think you can use s2k pistons and rods once you have the f20 crank if you went that route.

the 2.5 should break the 200tq mark without too much trouble, but remeber your gonna have a lower redline, so vtec controler and probobly a custom cam if thats not included, or already thought of.

IALuder · 04-30-2005, 09:27 PM

yea, i knew i would need a cam, ill probably go with crower for that to.

i never thought of the vtec controller.

*AzCivic* · 05-02-2005, 06:56 PM

i'd rather bore out a honda motor than stroke it, both change the complex dynamics that honda has already figured out, but imo boring has a less dramatic impact.

ebpda9 · 05-02-2005, 08:58 PM

boost and you're done

IALuder · 05-02-2005, 10:05 PM

but im leaning towards the NA route now. h22 is not boost friendly.

*AzCivic* · 05-02-2005, 10:17 PM

well if your gonna stroke out an h22 its going to be about as much to resleeve it and put in aftermarket rods/pistons, so it will be boost friendly if you spend the cash.

if i was gonna go n/a, i'd swap out the pistons to up the compression and get some good cams, and with the right bolt-ons should get you in the 200whp range pretty easily.

edit: oh wait i just saw that your getting the JDM h22 right? then hell you won't really need to up the compression.

IALuder · 05-02-2005, 10:22 PM

true, but have you seen what comes with their kit? after market piston rods so hell if i tell them what im planning maybe they can help custom them to be what i want.

04-29-2005, 04:19 PM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	crower stroker kit im looking into going NA with my H22a LSD swap thats going to happen in augest. while i have the motor out im thinking of doning a crower stroker kit. anyone seen a h22 done with this kit? anyone buy this? or think of this? i hear it bores the H22 to 2.5L. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

04-30-2005, 12:06 AM	#2
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	yeah im pretty sure its a 2.5 or 2.6 even. i dunno though, the rod stroke ratio is pretty good on a h22, i think theres a better way to spend the money in the motor to get more power, even all motor. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

04-30-2005, 12:46 AM	#3
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	i was going NA, but i figured i get a stroker. just to see how much power a h22 can handle with it. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

04-30-2005, 02:02 AM	#4
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	i remeber something about destroking it to a 2.0... dont remeber the details, i think it had a "safe" 9k redline and made real good power all the way through. im sure theres info about it somewhere. edit: i did some reading.. it you loose more low tq for the higher redline, basically turns it into a f20b motor. i think you can use s2k pistons and rods once you have the f20 crank if you went that route. the 2.5 should break the 200tq mark without too much trouble, but remeber your gonna have a lower redline, so vtec controler and probobly a custom cam if thats not included, or already thought of. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

04-30-2005, 09:27 PM	#5
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	yea, i knew i would need a cam, ill probably go with crower for that to. i never thought of the vtec controller. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

05-02-2005, 06:56 PM	#6
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	i'd rather bore out a honda motor than stroke it, both change the complex dynamics that honda has already figured out, but imo boring has a less dramatic impact.

05-02-2005, 08:58 PM	#7
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	boost and you're done __________________

05-02-2005, 10:05 PM	#8
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	but im leaning towards the NA route now. h22 is not boost friendly. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

05-02-2005, 10:17 PM	#9
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	well if your gonna stroke out an h22 its going to be about as much to resleeve it and put in aftermarket rods/pistons, so it will be boost friendly if you spend the cash. if i was gonna go n/a, i'd swap out the pistons to up the compression and get some good cams, and with the right bolt-ons should get you in the 200whp range pretty easily. edit: oh wait i just saw that your getting the JDM h22 right? then hell you won't really need to up the compression.

05-02-2005, 10:22 PM	#10
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	true, but have you seen what comes with their kit? after market piston rods so hell if i tell them what im planning maybe they can help custom them to be what i want. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode