.:HSTuners::

wheresmylicense · 08-03-2004, 09:04 PM

going to be installing my OBX header soon, and i had a question on the o2 sensor that plugs into the manifold... what do i do with it? if i just unplug it, will it be ok?

thanks.

ebpda9 · 08-03-2004, 09:20 PM

normally the header will have a bong welded for the o2 sensor. you might have to extend the wires for the sensor tho

*pdiggitydogg* · 08-03-2004, 09:21 PM

obx eh...I wouldnt be surprised if you lost power from it and it lasts only a few months. OBX anything is shit.

That o2 is your primary o2 sensor. Remove it from the stock manifold. DO NOT touch, mess with, clean, or tamper w/ the actual sensor element...be very careful with it.

When you change the header, put the o2 back into the obx's bung for it. Depending on your model, you may have to lengthen the o2 wires. You can do it yourself (i did) or you can buy an extension...somewhere...Im not at home and I cant look @ my favorites right now.

08-03-2004, 09:04 PM	#1
wheresmylicense Registered User Join Date: Jan 2003 Location: California Posts: 411	O2 sensor in header... going to be installing my OBX header soon, and i had a question on the o2 sensor that plugs into the manifold... what do i do with it? if i just unplug it, will it be ok? thanks. __________________ ~DevT Pictures of My Baby

08-03-2004, 09:20 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	normally the header will have a bong welded for the o2 sensor. you might have to extend the wires for the sensor tho __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-03-2004, 09:21 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	obx eh...I wouldnt be surprised if you lost power from it and it lasts only a few months. OBX anything is shit. That o2 is your primary o2 sensor. Remove it from the stock manifold. DO NOT touch, mess with, clean, or tamper w/ the actual sensor element...be very careful with it. When you change the header, put the o2 back into the obx's bung for it. Depending on your model, you may have to lengthen the o2 wires. You can do it yourself (i did) or you can buy an extension...somewhere...Im not at home and I cant look @ my favorites right now.