.:HSTuners::

03-16-2003, 09:35 PM

I really want to shave my door moldings and ive asked around, and god damn it cost a lot. I was just wondering if its possibel to do it my self. If anyone has any experience in this please talk to me. peace

TeriyakiBroccoli · 03-16-2003, 10:16 PM

um not really.. this would be hard for you to do yourself because you just dont have the tools or supplies to do it!

You'll basically need to sand down the shit u dont want, then fill it with some special metal mixture that sets, then shave that down smooth, then repaint over it.

Where do you live? i know this one shop that should be able to do it really well for cheap.

03-17-2003, 12:05 AM

try autolock.com thy have a remote kit 4 cheap but don't know nothin else sorry

03-17-2003, 09:00 PM

well you need to take off the moldings grid the edges to metal weld a peice in to fill up the gap so it is not all putty. the use some putty to make it smooth. it is alot of sanding and and getting it just right. don't do it your self if you have never done anything like this

pimpinprelude · 03-28-2003, 09:29 PM

yea thay make lil pieces of metal that you weld in there...its really not that hard you could do it yourself. i helped a friend do it, and he dident use any metal to help fill in the gap ,it was all filler..you just have to mix the bondo really hot (put a lot of hardener in it). so it doesnt just fall off the car. lol.. good luck

04-01-2003, 11:23 AM

holy crap that is alot of filler! has it cracked yet or anything? That much in your door that gets slammed shut all the time is not good! but hey if it worked you got lucky

pimpinprelude · 04-01-2003, 06:33 PM

the doors never get used cuz its a 4 door, and we did it to the 2 back ones....

autocrossthugg · 04-01-2003, 08:19 PM

It's going to take alot of time, but you can do it yourself, that's why it costs so much.

autocrossthugg · 04-01-2003, 08:23 PM

Quote:

Originally posted by Ebtekxpnoy
I really want to shave my door moldings and ive asked around, and god damn it cost a lot. I was just wondering if its possibel to do it my self. If anyone has any experience in this please talk to me. peace

you are talking about just the mouldings, not the door HANDLES??

03-16-2003, 09:35 PM	#1
Ebtekxpnoy Posts: n/a	Shaving Door Moldings? I really want to shave my door moldings and ive asked around, and god damn it cost a lot. I was just wondering if its possibel to do it my self. If anyone has any experience in this please talk to me. peace

03-16-2003, 10:16 PM	#2
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 39 Posts: 1,490	um not really.. this would be hard for you to do yourself because you just dont have the tools or supplies to do it! You'll basically need to sand down the shit u dont want, then fill it with some special metal mixture that sets, then shave that down smooth, then repaint over it. Where do you live? i know this one shop that should be able to do it really well for cheap. __________________ everyone loves the turbizzim.

04-01-2003, 08:19 PM	#8
autocrossthugg 2nd Gear Join Date: Mar 2003 Location: McKinleyville CA. Age: 59 Posts: 205	It's going to take alot of time, but you can do it yourself, that's why it costs so much. __________________ Ground Control Coil-overs Eibach springs Tokico Struts(Illumina front & HD rear) Suspension Techniques Anti-Sway Bars (f&r) SPC Camber Kits (f&r) Front Upper Strut Bar Rear Lower Bar Borbet Type B rims w/Falken Azenis for autocross Kosei K-1 rims w/Yokohama AVS-ES100 for street 3-point Sparco Harness

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-17-2003, 12:05 AM	#3
themadhatter Posts: n/a	try autolock.com thy have a remote kit 4 cheap but don't know nothin else sorry

03-17-2003, 09:00 PM	#4
alpine3069 Posts: n/a	well you need to take off the moldings grid the edges to metal weld a peice in to fill up the gap so it is not all putty. the use some putty to make it smooth. it is alot of sanding and and getting it just right. don't do it your self if you have never done anything like this

03-28-2003, 09:29 PM	#5
pimpinprelude Registered User Join Date: Mar 2003 Location: Atlanta Age: 37 Posts: 1,325	yea thay make lil pieces of metal that you weld in there...its really not that hard you could do it yourself. i helped a friend do it, and he dident use any metal to help fill in the gap ,it was all filler..you just have to mix the bondo really hot (put a lot of hardener in it). so it doesnt just fall off the car. lol.. good luck

04-01-2003, 11:23 AM	#6
alpine3069 Posts: n/a	holy crap that is alot of filler! has it cracked yet or anything? That much in your door that gets slammed shut all the time is not good! but hey if it worked you got lucky

04-01-2003, 06:33 PM	#7
pimpinprelude Registered User Join Date: Mar 2003 Location: Atlanta Age: 37 Posts: 1,325	the doors never get used cuz its a 4 door, and we did it to the 2 back ones....