.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Tech Talk > Wheels, Tires, Suspension, and Brakes
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 02-12-2003, 08:26 PM   #1
Damaclese
 
Posts: n/a
Camber Question

I have a 97 Civic LX and I'm going to order some lowering springs that'll drop the car 2.25 inches. My roommate says that my car may not be able to handle that kinda drop with 17's without a camber kit. Can I get an opinion from somebody who actually knows what they're talking about?
  Reply With Quote
Old 02-12-2003, 10:30 PM   #2
TeriyakiBroccoli
5th Gear
 
TeriyakiBroccoli's Avatar
 
Join Date: Sep 2002
Location: Orange County, Southern California
Age: 39
Posts: 1,490
I think you could handle that drop, there will be some tire rub when taking fast corners however.

A camber kit basically pushes out the arms so the tires sit straight up and down, but more than likely with the suspension setup of the civic, your toe and/or caster may be off.
__________________


everyone loves the turbizzim.
TeriyakiBroccoli is offline   Reply With Quote
Old 02-12-2003, 11:18 PM   #3
96coupe
 
Posts: n/a
your tires will most likely have bad camber wear. this means the tires will wear unevenly and you will need to replace them much sooner. this is very common w/ low-profile tires and a drop of over 1.5". i would highly recommend a camber kit. much cheaper in the long run than replacing 17" tires every couple of months.

also, with that kind of drop i would recommend new struts b/c your stock struts will wear out quickly.
  Reply With Quote
Old 02-13-2003, 08:35 AM   #4
Racing Rice
Project Combat Honda
 
Racing Rice's Avatar
 
Join Date: Sep 2001
Location: Highland,OH
Age: 45
Posts: 7,985
Goodluck running that much drop with 17s. Thats a lot. You better make sure your wheels have a +45mm offset.
__________________
Racing Rice
Racing Rice is offline   Reply With Quote
Old 02-25-2003, 12:28 AM   #5
96civicex
1st Gear
 
Join Date: Jan 2003
Location: North Carolina
Age: 42
Posts: 62
i have the same question but instead of 2.25, i am wanting to use eibach sportline springs(1.8 in)
96civicex is offline   Reply With Quote
Old 02-25-2003, 01:27 AM   #6
TeriyakiBroccoli
5th Gear
 
TeriyakiBroccoli's Avatar
 
Join Date: Sep 2002
Location: Orange County, Southern California
Age: 39
Posts: 1,490
I'm on 17's w/ 45 profile tires, and I'm far from rubbin. 2" drop.
__________________


everyone loves the turbizzim.
TeriyakiBroccoli is offline   Reply With Quote
Old 02-25-2003, 01:36 AM   #7
94_AcCoRd_EX
Insomniac Moderator
 
94_AcCoRd_EX's Avatar
 
Join Date: Aug 2001
Location: OR
Age: 43
Posts: 11,142
With any drop over 1.5" or so (varies per car) you risk wearing your tires unevenly due to too much negative camber. With a 2.25" drop, you'll almost definitely need a camber kit, but you'll have to watch out that you don't rub.
__________________
1994 Accord EX coupe

--Need hosting for your pics on HST? PM me...--
94_AcCoRd_EX is offline   Reply With Quote
Old 02-25-2003, 08:23 AM   #8
blind34_1
Registered User
 
blind34_1's Avatar
 
Join Date: May 2002
Location: IL
Age: 40
Posts: 1,813
and without the proper kit you'll be instantly recognizable as the "car whose wheels are rolling at an angle." so a crx like that the other day and just shook my head.
blind34_1 is offline   Reply With Quote
Old 02-25-2003, 11:32 AM   #9
96civicex
1st Gear
 
Join Date: Jan 2003
Location: North Carolina
Age: 42
Posts: 62
So do you guys think that i'll be ok without a camber kit with a 1.8 or is it just a maybe thing and also will it be ok if i go without aftermarket struts for a while
96civicex is offline   Reply With Quote
Old 02-25-2003, 03:17 PM   #10
blind34_1
Registered User
 
blind34_1's Avatar
 
Join Date: May 2002
Location: IL
Age: 40
Posts: 1,813
what, you mean no struts at all or just keep running the stock ones? I've been running the stock ones for almost 2 years. the ride sucks cause they are blown , but suspension isnt my biggest concern right now. you'll be fine. I'd say save up enough for a camber kit, then install your lowering kit. if your wheels look funky, use the cmaber kit.
blind34_1 is offline   Reply With Quote
Old 02-25-2003, 11:38 PM   #11
96coupe
 
Posts: n/a
any drop over 1.5" i'd recommend aftermarket struts due to the additional wear to the stock struts, but you should be able to ride for a little while w/ the stock struts. the ride quality might be bad though.
  Reply With Quote
Old 03-01-2003, 01:52 PM   #12
Shot 2 Hel
 
Posts: n/a
so are you doing a 1.8" or a 2.25" drop?
  Reply With Quote
Old 04-19-2003, 06:25 PM   #13
latin_racer
 
Posts: n/a
CAMBER QUESTION

I just had to replace my front tires because of I lowered my car without a camber kit. I just odered some camber kit called R-1 racing sport? Are they good. Also would my tires be ok until I get the camber next week, or would I ****ed them up? thanks a lot,


daniel
  Reply With Quote
Old 04-20-2003, 12:09 AM   #14
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 44
Posts: 17,266
well they should be ok. camber does not wear the tires as much as toe does. after you get the camber kit installed have the car alinged for toe. it will change drastically once the camber goes to 0
__________________


ebpda9 is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump


All times are GMT -5. The time now is 06:09 AM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com