.:HSTuners::

Jayberg00 · 08-16-2004, 08:03 PM

i was thinking about putting some CTR piston in my B20 how well would it run and if its a good idea

*pdiggitydogg* · 08-16-2004, 08:47 PM

the b20 bore is 84mm and the ctr is 81mm
so you would need to have custom pistons made that match pct specs to fit the block

that would give 12:1 compression

MissJDM · 08-19-2004, 12:48 AM

Try forged JE Pistons. With CTR Pistons..10.8:1 on a n/a set up, I would rather get pistons with higher compression.

08-16-2004, 08:03 PM	#1
Jayberg00 1st Gear Join Date: Nov 2002 Location: Newark, Nj Age: 39 Posts: 83	Recomended Piston i was thinking about putting some CTR piston in my B20 how well would it run and if its a good idea __________________ "5 Speed Imports" The New Racers, Gear Up .

08-19-2004, 12:48 AM	#3
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	Try forged JE Pistons. With CTR Pistons..10.8:1 on a n/a set up, I would rather get pistons with higher compression. __________________ you say it best when you say nothing at all

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-16-2004, 08:47 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	the b20 bore is 84mm and the ctr is 81mm so you would need to have custom pistons made that match pct specs to fit the block that would give 12:1 compression