.:HSTuners::

02-28-2002, 07:44 PM

need some help choosing cam gears.
i've been reading that most of the slippage problems with all of the different manufacturers have been corrected.
is this true from everyones experience?

so far, my choice is the skunk2.

opinions please!

94_AcCoRd_EX · 02-28-2002, 08:05 PM

From what I've heard, Skunk 2 would be a good choice. I've heard rumors of slipping problems with the AEM, but I have no personal experience with them.

02-28-2002, 11:57 PM

DC Sports are good too but more expensive than Skunk2's

2ndGenTeg · 03-01-2002, 02:24 AM

I personally like the Spoon. They use the stock teeth, so the fit is the best. Not too much more coin than everyone else's, either. Plus they have the added benefit of enabling you to say that you're Spoon equipped.

03-17-2002, 07:33 PM

Yeah deffinatly spoon are the best. There are many slipage problems with aem since they are not really personalize to your car. Ive heard that they use the same cams for b18b, b18a, b16a.

04-03-2002, 10:07 PM

I have RC sport cam gears........not too many people heard of them but they are relatively inexpensive and work well.

All my friends have those ones also, and nobody has ever had any problems with them.
Before I came across those though, I was gonna go for Skunk2 or Spoon

04-08-2002, 11:11 PM

Jun are also very good cams kinda expensive but much better than aem or dc sports. I personally do not like the DC sports or the Aem cams. If your looking for real power go with Jun, Toda, or Spoon in that order. If you dont believe me just look at these dyno charts Dyno Charts for JUN Toda and ITR cams! The ITR is a very good cam probely a little better then aem or dc sports cam and look at the results.

02-28-2002, 07:44 PM	#1
qwikenuf Posts: n/a	cam gears need some help choosing cam gears. i've been reading that most of the slippage problems with all of the different manufacturers have been corrected. is this true from everyones experience? so far, my choice is the skunk2. opinions please!

02-28-2002, 08:05 PM	#2
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	From what I've heard, Skunk 2 would be a good choice. I've heard rumors of slipping problems with the AEM, but I have no personal experience with them. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-28-2002, 11:57 PM	#3
OneDopeTeg Posts: n/a	DC Sports are good too but more expensive than Skunk2's

03-01-2002, 02:24 AM	#4
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 44 Posts: 830	I personally like the Spoon. They use the stock teeth, so the fit is the best. Not too much more coin than everyone else's, either. Plus they have the added benefit of enabling you to say that you're Spoon equipped.

03-17-2002, 07:33 PM	#5
Integra221 Posts: n/a	Yeah deffinatly spoon are the best. There are many slipage problems with aem since they are not really personalize to your car. Ive heard that they use the same cams for b18b, b18a, b16a.

04-03-2002, 10:07 PM	#6
Incubus Posts: n/a	I have RC sport cam gears........not too many people heard of them but they are relatively inexpensive and work well. All my friends have those ones also, and nobody has ever had any problems with them. Before I came across those though, I was gonna go for Skunk2 or Spoon

04-08-2002, 11:11 PM	#7
Integra221 Posts: n/a	Jun are also very good cams kinda expensive but much better than aem or dc sports. I personally do not like the DC sports or the Aem cams. If your looking for real power go with Jun, Toda, or Spoon in that order. If you dont believe me just look at these dyno charts Dyno Charts for JUN Toda and ITR cams! The ITR is a very good cam probely a little better then aem or dc sports cam and look at the results.