.:HSTuners::

*Whtehnda93DXSdn* · 11-19-2001, 07:43 PM

Hi all.

I've got mu Autometer guage all mounted into my car and all and I have everything operational but my hook up to the coil to actual get my read out. does anyone have a pic of the wire they tapped into at the cluster/ECU or Distributor that I can use to go by?

this would be great. I have tried to decode the Haynes manual to do it but that's a waste of my time. Appreciate the info.

Thanks....

11-20-2001, 12:36 AM

i dont have a pic but the wire is really easy to locate... if you know where your distributor is, you'll see to set of connectors w/ wires.. you want the connector w/ 2 wires.. those wires are going to the positive and neg. of the coil.. the BLUE wire is the negative signal... tap into that (do not cut wire) and youre all set... i just did this project for my 94 dx... goodluck!!!

*Whtehnda93DXSdn* · 11-20-2001, 09:24 AM

Thanks for the info SWIFT...I could have swore that I tapped into that once last time and it spun the Tach needle the opposite way...

I'll look at see..thanks

*Whtehnda93DXSdn* · 11-26-2001, 12:30 AM

it was indeed the Blue wire on the one plug...thanks for the info

works like a charm now...

11-26-2001, 01:21 AM

anytime... :

: post some pics so we can see it... i will too when im done w/ the film..

11-19-2001, 07:43 PM	#1
Whtehnda93DXSdn It has 4 Doors... Join Date: Nov 2001 Location: Fredericksburg,Va Age: 49 Posts: 907	Which wire for Tach????? Hi all. I've got mu Autometer guage all mounted into my car and all and I have everything operational but my hook up to the coil to actual get my read out. does anyone have a pic of the wire they tapped into at the cluster/ECU or Distributor that I can use to go by? this would be great. I have tried to decode the Haynes manual to do it but that's a waste of my time. Appreciate the info. Thanks.... __________________ Another good forum site: Tuners Alliance

11-20-2001, 09:24 AM	#3
Whtehnda93DXSdn It has 4 Doors... Join Date: Nov 2001 Location: Fredericksburg,Va Age: 49 Posts: 907	Thanks for the info SWIFT...I could have swore that I tapped into that once last time and it spun the Tach needle the opposite way... I'll look at see..thanks __________________ Another good forum site: Tuners Alliance

11-26-2001, 12:30 AM	#4
Whtehnda93DXSdn It has 4 Doors... Join Date: Nov 2001 Location: Fredericksburg,Va Age: 49 Posts: 907	it was indeed the Blue wire on the one plug...thanks for the info works like a charm now... __________________ Another good forum site: Tuners Alliance

11-26-2001, 01:21 AM	#5
SWIFT Posts: n/a	anytime... :: post some pics so we can see it... i will too when im done w/ the film..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-20-2001, 12:36 AM	#2
SWIFT Posts: n/a	i dont have a pic but the wire is really easy to locate... if you know where your distributor is, you'll see to set of connectors w/ wires.. you want the connector w/ 2 wires.. those wires are going to the positive and neg. of the coil.. the BLUE wire is the negative signal... tap into that (do not cut wire) and youre all set... i just did this project for my 94 dx... goodluck!!!