.:HSTuners::

01-13-2002, 01:39 AM

Well I don't like em personally, but i know people want to do this so this i whatcha do.

Step 1. Go to the fuse box and remove the flasher:

Step 2. Open up the flasher and look for this resistor:

.

Step 3. You will need to change this resistor to make your signal blink faster. The resistance is around 90K If you want to make your signal blink twice as fast as stock, then you would replace the resistor with a 45K.

The lower the resistance, the faster it will blink

01-13-2002, 01:40 AM

is there a reason pictures don't work in this forum?

thermal · 01-13-2002, 05:17 PM

that's ok, the pics u attached are quick to load anyway......thanks for your contribution man.....

01-13-2002, 01:39 AM	#1
BrandonClaps Posts: n/a	HowTo: Rapid Blinkers Well I don't like em personally, but i know people want to do this so this i whatcha do. Step 1. Go to the fuse box and remove the flasher: Step 2. Open up the flasher and look for this resistor: . Step 3. You will need to change this resistor to make your signal blink faster. The resistance is around 90K If you want to make your signal blink twice as fast as stock, then you would replace the resistor with a 45K. The lower the resistance, the faster it will blink

01-13-2002, 05:17 PM	#3
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	that's ok, the pics u attached are quick to load anyway......thanks for your contribution man..... __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-13-2002, 01:40 AM	#2
BrandonClaps Posts: n/a	is there a reason pictures don't work in this forum?