.:HSTuners::

IALuder · 09-08-2005, 04:34 PM

ok i really need some help with drywall patching...
ive tried lookin online but the stuff there makes no sense to me :P
anyways this is my situation:
ive got a hole in the wall about the size of lets say a... fist
i put a mesh over it, bought spackling paste (thats what the guy at home depot told me to get), and a "knife"
so im trying to put this stuff over the mesh but it looks horrible... like around the hole the stuff keeps going through and not sticking so u can still see the holes of the mesh. i know im supposed to apply, and then use a drywall sponge to file... but the layer i applied looks so thin that im scared if i file ill be back to where i was an hour ago...

anybody know how to fix this properly??? cause im about to take a sheet of paper and tape it on, then paint over it (which i doubt will work well)

-.NsaNiTi.- · 09-08-2005, 04:38 PM

drywall tape.. ?

IALuder · 09-08-2005, 04:46 PM

........what purpose does it have?

*AzCivic* · 09-08-2005, 05:04 PM

ahahah, i just started fixing a hole in my drywall.

you'll probably have to put a few layers on then sand it back til its smooth with the rest of the wall.

*pdiggitydogg* · 09-08-2005, 07:01 PM

Well, depending on how large your fist is, you can:
Cut the hole into a square
Then take a piece of drywall, cutting it roughly 1.5-2.5" larger than the hole in the wall. (the more the better)
Now, take a razor knife and score 1 SIDE of the replacement square 1.5" along each edge.
What you do next is peel the drywall and paper off 1 side of the patch, leaving the other side of the paper. Just insert the plug and mud over the paper.

If the hole is larger than say, 3x4", Id suggest doing the same thing above, but also buy a 10-12" section of 1x1 (aka furring strip) and screw that into the good drywall around the hole, making a brace for the patch.

This is as good as I can explain it right now. I do drywall...fuck that mesh shit

edit***oh, and yes, it takes several coats of mud, and sanding before youre done. You really can use that mesh stuff and a ton of mud, but I just dont like to.

sicones · 09-08-2005, 09:02 PM

/\what he said, I'm takin the 80's paneling out of my basement right now and putting up all new drywall, its such a pain in the ass

*pdiggitydogg* · 09-08-2005, 09:06 PM

Pff, I just throw 3/8 over the top of the paneling and use a lot more glue w/ 1" and 2" (when I find the studs) screws.
Make sure you sink any screw heads a little past the paper, or you'll see them after mudding

sicones · 09-08-2005, 09:08 PM

na my father would never go for that, he’s gotta have everything neat and “done right”

09-08-2005, 04:34 PM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	help me fix this........ ok i really need some help with drywall patching... ive tried lookin online but the stuff there makes no sense to me :P anyways this is my situation: ive got a hole in the wall about the size of lets say a... fist i put a mesh over it, bought spackling paste (thats what the guy at home depot told me to get), and a "knife" so im trying to put this stuff over the mesh but it looks horrible... like around the hole the stuff keeps going through and not sticking so u can still see the holes of the mesh. i know im supposed to apply, and then use a drywall sponge to file... but the layer i applied looks so thin that im scared if i file ill be back to where i was an hour ago... anybody know how to fix this properly??? cause im about to take a sheet of paper and tape it on, then paint over it (which i doubt will work well) __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

09-08-2005, 04:38 PM	#2
-.NsaNiTi.- Registered User Join Date: Mar 2004 Location: the nasti nati Age: 38 Posts: 130	drywall tape.. ? __________________

09-08-2005, 04:46 PM	#3
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	........what purpose does it have? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

09-08-2005, 07:01 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Well, depending on how large your fist is, you can: Cut the hole into a square Then take a piece of drywall, cutting it roughly 1.5-2.5" larger than the hole in the wall. (the more the better) Now, take a razor knife and score 1 SIDE of the replacement square 1.5" along each edge. What you do next is peel the drywall and paper off 1 side of the patch, leaving the other side of the paper. Just insert the plug and mud over the paper. If the hole is larger than say, 3x4", Id suggest doing the same thing above, but also buy a 10-12" section of 1x1 (aka furring strip) and screw that into the good drywall around the hole, making a brace for the patch. This is as good as I can explain it right now. I do drywall...fuck that mesh shit edit**oh, and yes, it takes several coats of mud, and sanding before youre done. You really can use that mesh stuff and a ton of mud, but I just dont like to. Last edited by pdiggitydogg : 09-08-2005 at 07:05 PM.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-08-2005, 05:04 PM	#4
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	ahahah, i just started fixing a hole in my drywall. you'll probably have to put a few layers on then sand it back til its smooth with the rest of the wall.

09-08-2005, 09:02 PM	#6
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	/\what he said, I'm takin the 80's paneling out of my basement right now and putting up all new drywall, its such a pain in the ass

09-08-2005, 09:06 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Pff, I just throw 3/8 over the top of the paneling and use a lot more glue w/ 1" and 2" (when I find the studs) screws. Make sure you sink any screw heads a little past the paper, or you'll see them after mudding

09-08-2005, 09:08 PM	#8
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	na my father would never go for that, he’s gotta have everything neat and “done right”