.:HSTuners::

krz2fer · 11-18-2002, 10:33 AM

I installed some Jaguar Eyes on my 92 civic and when inspecting the units I noticed that the bulbs seem to be connected to the wires through a soldered connected. How am I supposed to ever change the bulb, if I say, blew a bulb or just wanted the blue-tinted HID-look bulbs?

Is it something hat has to be professionally done?

-Chris

TeriyakiBroccoli · 11-23-2002, 05:41 AM

I've got the same question.

11-24-2002, 10:13 PM

good luck.... you can always unsolder them and put new ones in but i dont know if that will work. it would be a challange,.... well and opertunity to excel actully..... i say just hope they dont blow.

*pdiggitydogg* · 12-02-2002, 07:27 PM

make em last and get/use the aux lights instead

2000Pimpinex · 12-12-2002, 03:15 PM

They can still be removed. It will just take some force. Solder isn't the strongest thing holding them in. Just becareful not to break anything.

nonovurbizniz · 12-19-2002, 01:02 PM

I would definatly recomend de-soldering them over tearing them off.

all you have to do is heat up the metal the solder will melt and you either just pull off the wire or use a de-soldering bubble (or what ever those little squeez bottle suckers are called)

11-18-2002, 10:33 AM	#1
krz2fer 2nd Gear Join Date: Apr 2002 Location: VA Posts: 122	Projector bulbs soldered into place? I installed some Jaguar Eyes on my 92 civic and when inspecting the units I noticed that the bulbs seem to be connected to the wires through a soldered connected. How am I supposed to ever change the bulb, if I say, blew a bulb or just wanted the blue-tinted HID-look bulbs? Is it something hat has to be professionally done? -Chris __________________ krz2fer --- "Aim for the sky, straight into the sun."

12-12-2002, 03:15 PM	#5
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 43 Posts: 1,427	They can still be removed. It will just take some force. Solder isn't the strongest thing holding them in. Just becareful not to break anything. __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

12-19-2002, 01:02 PM	#6
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 47 Posts: 2,693	I would definatly recomend de-soldering them over tearing them off. all you have to do is heat up the metal the solder will melt and you either just pull off the wire or use a de-soldering bubble (or what ever those little squeez bottle suckers are called) __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-23-2002, 05:41 AM	#2
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 38 Posts: 1,490	I've got the same question.

11-24-2002, 10:13 PM	#3
SofaKingSmooth Posts: n/a	good luck.... you can always unsolder them and put new ones in but i dont know if that will work. it would be a challange,.... well and opertunity to excel actully..... i say just hope they dont blow.

12-02-2002, 07:27 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	make em last and get/use the aux lights instead