.:HSTuners::

03-29-2003, 09:40 AM

The power window on the passenger side of my car is not working. I doubt it is the motor, because the motor was replaced a few months ago and was showing no signs of wear. What else could go wrong to stop my window from working?

ebpda9 · 03-29-2003, 11:54 AM

hmmm maybe it came unplugged if you worked on it, and didn't put it tight there.

03-29-2003, 12:48 PM

Quote:

Originally posted by hondaman-iac
hmmm maybe it came unplugged if you worked on it, and didn't put it tight there.

It seems that way - cause the window just does not work now - could it be some kind of retainer inside the mechanism that broke?

ebpda9 · 03-29-2003, 01:13 PM

beats me but if the motor is burn now it looks like you have to go deeper into wireing to find a short or something

04-04-2003, 01:25 AM

did you check the manual override switch??

The little flip switch on the arm rest is it in the on or off position.

Maybe the 94's dont have them if they dont disregard.

G FLICK

04-07-2003, 06:47 PM

LOL, this is a problem on all Honda Civics, manufacturer error The reason for this is the windows are on the tracks reaallly good, the MOTOR is fine Try WD40

04-19-2003, 02:29 AM

sounds to me like your run channel has dried out causing the window regulator(the thing it moves up and down on) to bend. It's fairly common. Not to say it couldn't be the motor or the switch but on a civic that would be very very uncommon.

03-29-2003, 09:40 AM	#1
cashizslick Posts: n/a	Power Window Not Working The power window on the passenger side of my car is not working. I doubt it is the motor, because the motor was replaced a few months ago and was showing no signs of wear. What else could go wrong to stop my window from working?

03-29-2003, 11:54 AM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	hmmm maybe it came unplugged if you worked on it, and didn't put it tight there. __________________

03-29-2003, 01:13 PM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	beats me but if the motor is burn now it looks like you have to go deeper into wireing to find a short or something __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-04-2003, 01:25 AM	#5
turbowhat_n_dat Posts: n/a	did you check the manual override switch?? The little flip switch on the arm rest is it in the on or off position. Maybe the 94's dont have them if they dont disregard. G FLICK

04-07-2003, 06:47 PM	#6
SilverCiv Posts: n/a	LOL, this is a problem on all Honda Civics, manufacturer error The reason for this is the windows are on the tracks reaallly good, the MOTOR is fine Try WD40

04-19-2003, 02:29 AM	#7
HndaTch627 Posts: n/a	sounds to me like your run channel has dried out causing the window regulator(the thing it moves up and down on) to bend. It's fairly common. Not to say it couldn't be the motor or the switch but on a civic that would be very very uncommon.