.:HSTuners::

thermal · 11-24-2003, 12:14 AM

Is a f**kin' nightmare! OBDo conversion + B17 suks so bad that we ended up swapping out wire harnesses from another EF... the whole harness to include ECU to engine bay to even lighting. We are almost done tho. The OBD2 B18C5 swap into an OBD1 delsol was way easier. Anyway, just a heads up to everyone

blind34_1 · 11-24-2003, 12:49 AM

ill keep it in mind...im trying to think what the b17 came in...96-00 civic? cant remember, its one of those obscure swaps...

is this ANOTHER project car, or are you just lending a hand?

*pdiggitydogg* · 11-24-2003, 10:21 AM

ah yes...swappin fun

ebpda9 · 11-24-2003, 10:35 AM

Quote:

Originally posted by blind34_1
ill keep it in mind...im trying to think what the b17 came in...96-00 civic? cant remember, its one of those obscure swaps...

is this ANOTHER project car, or are you just lending a hand?

the b17 came in the da9(90-93 integra) GSR

IALuder · 11-24-2003, 02:19 PM

b17a1 is gsr and b17b is ls/gs/rs. right?

i was going to do a B17a1 and i realized the difficultys and decided not to. plus finding parts for a B17a1 is hell. no one makes anything for it really. unless you do overnight shipping from japan. which cost a shit load for just a part. not worth the swap in my opinion.

but good luck and have fun. let me know how it goes.

ebpda9 · 11-24-2003, 05:57 PM

Quote:

Originally posted by SFKing
b17a1 is gsr and b17b is ls/gs/rs. right?

i was going to do a B17a1 and i realized the difficultys and decided not to. plus finding parts for a B17a1 is hell. no one makes anything for it really. unless you do overnight shipping from japan. which cost a shit load for just a part. not worth the swap in my opinion.

but good luck and have fun. let me know how it goes.

no the ls/gs/rs have the b18a1.

thermal · 11-24-2003, 07:05 PM

I was jst helping out somebody on the swap. The problem was, they really never done it before. So for the most part, we were all putting out heads together and just apply what makes sense.

IALuder · 11-24-2003, 10:20 PM

hmmm, no how to on the swap anywhere?
then agian its not that popular.

thanks hondaman for the correct engine codes.
by the way how cheap is you AEM SRI

ebpda9 · 11-24-2003, 10:43 PM

http://styledright.com/catalog/produ...roducts_id=334
$75.15 shipped

11-25-2003, 11:49 AM

Quote:

Originally posted by hondaman-iac
the b17 came in the da9(90-93 integra) GSR

Oh yea, Gotta love the 1.7 170hp B16 knockoff. Wierd motor really - quite uncommon but a great find none the less. Cable tranny as well am i right?

IALuder · 11-25-2003, 01:32 PM

yes, cable tranny.

its a 1.7 160HP 117TQ and dohc. very nice motor and a rare find indeed.

thermal · 12-07-2003, 10:22 AM

I paid for his dyno the same day I dynoed mine. Completely stock B17, he pulled off 140whp and 100ft/lbs torque on a light a$$ car. We have plans to turbo that low compression engine...

*pdiggitydogg* · 12-07-2003, 11:32 AM

hey good numbers

I thought the b17 was 10:1 compression though....

thermal · 12-07-2003, 12:01 PM

The owner told me that it's on the 9's..... I'm gonna kick his a$$. We do plan to turbo that sh!t.

I found this:
http://www.londonautoclub.org/html/t...gine_guide.htm

10.0:1 You da man Pdigg

*pdiggitydogg* · 12-07-2003, 12:20 PM

see all that useless honda knowledge takes up too much room!
No room for turbo info and knowledge for things I should know....

eh just throw a cometic thick headgasket on there
cometic .pdf

thermal · 12-07-2003, 03:35 PM

Good find. I'm looking do drop the compression on mind a little. I'm looking into products by in-line pro or GReddy.....

*pdiggitydogg* · 12-07-2003, 03:51 PM

i hear people that really like the cometic gaskets
Im not too sure what their prices are though...

11-24-2003, 12:14 AM	#1
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	B17 swap on an EF Is a f**kin' nightmare! OBDo conversion + B17 suks so bad that we ended up swapping out wire harnesses from another EF... the whole harness to include ECU to engine bay to even lighting. We are almost done tho. The OBD2 B18C5 swap into an OBD1 delsol was way easier. Anyway, just a heads up to everyone __________________ Project Teg Visit the Turbo Forum

11-24-2003, 02:19 PM	#5
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	b17a1 is gsr and b17b is ls/gs/rs. right? i was going to do a B17a1 and i realized the difficultys and decided not to. plus finding parts for a B17a1 is hell. no one makes anything for it really. unless you do overnight shipping from japan. which cost a shit load for just a part. not worth the swap in my opinion. but good luck and have fun. let me know how it goes. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

11-24-2003, 07:05 PM	#7
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I was jst helping out somebody on the swap. The problem was, they really never done it before. So for the most part, we were all putting out heads together and just apply what makes sense. __________________ Project Teg Visit the Turbo Forum

11-24-2003, 10:20 PM	#8
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	hmmm, no how to on the swap anywhere? then agian its not that popular. thanks hondaman for the correct engine codes. by the way how cheap is you AEM SRI __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

11-24-2003, 10:43 PM	#9
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	http://styledright.com/catalog/produ...roducts_id=334 $75.15 shipped __________________

11-24-2003, 12:49 AM	#2
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 40 Posts: 1,813	ill keep it in mind...im trying to think what the b17 came in...96-00 civic? cant remember, its one of those obscure swaps... is this ANOTHER project car, or are you just lending a hand?

11-24-2003, 10:21 AM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	ah yes...swappin fun

11-25-2003, 01:32 PM	#11
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	yes, cable tranny. its a 1.7 160HP 117TQ and dohc. very nice motor and a rare find indeed. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

12-07-2003, 10:22 AM	#12
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I paid for his dyno the same day I dynoed mine. Completely stock B17, he pulled off 140whp and 100ft/lbs torque on a light a$$ car. We have plans to turbo that low compression engine... __________________ Project Teg Visit the Turbo Forum

12-07-2003, 11:32 AM	#13
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	hey good numbers I thought the b17 was 10:1 compression though....

12-07-2003, 12:01 PM	#14
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	The owner told me that it's on the 9's..... I'm gonna kick his a$$. We do plan to turbo that sh!t. I found this: http://www.londonautoclub.org/html/t...gine_guide.htm 10.0:1 You da man Pdigg __________________ Project Teg Visit the Turbo Forum

12-07-2003, 12:20 PM	#15
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	see all that useless honda knowledge takes up too much room! No room for turbo info and knowledge for things I should know.... eh just throw a cometic thick headgasket on there cometic .pdf

12-07-2003, 03:35 PM	#16
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Good find. I'm looking do drop the compression on mind a little. I'm looking into products by in-line pro or GReddy..... __________________ Project Teg Visit the Turbo Forum

12-07-2003, 03:51 PM	#17
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	i hear people that really like the cometic gaskets Im not too sure what their prices are though...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode