.:HSTuners::

Civic_RedLine · 07-30-2004, 01:32 AM

Whoever has the civic 2001 coupe can you please tell me where the screws to the seat are located?
My driver side seat wiggles like a computer chair that has loose bolts. My car seat wiggles back and forth especially when I shift hard... so can anyone help me out on what type of socket I need in order to tighten the bolts and also where it is located?

Thanks for any help

*pdiggitydogg* · 07-30-2004, 09:42 AM

10-12mm bolts, no screws.
There would be 4 of them - on the floor - you cant miss them.

If theyre tight, maybe remove the seat (dont forget to disconnect the seatbelt sensor clip (cant miss that either)) and check the bolts under the rails that hold the actual seat.

Can you move the seat w/ your hands when its not moving?

(why did you buy this car if all you ever say about it are the problems?)

Civic_RedLine · 07-30-2004, 09:49 AM

slight problems... I got it for 8500 flat no tax no nothing cuz he did it as a give... the car came with 40k mileage that is a good deal compared to certified 2001 with 40k for 15 thousand dollars..

Yes if I swing hard enough the chair goes back and forth not that much though but it does move a little .

*pdiggitydogg* · 07-30-2004, 09:55 AM

Which part of the seat is actually moving when you push on it? That will tell you what needs to be tightened.

(If I were you Id fix all these little things cheaply and sell it for more than you paid and get a later model 6th gen civic w/ less problems but maybe higher miles. Just my opinion)

*AzCivic* · 07-30-2004, 09:59 AM

Quote:

Originally posted by Civic_RedLine
slight problems... I got it for 8500 flat no tax no nothing cuz he did it as a give

why was it so cheap?

Civic_RedLine · 07-30-2004, 10:04 AM

the guy wanted 10k but I kept lowering an dlowering to 8500 cuz of the little defects it had...

I cant sell it because my grandma bought it for me.

sicones · 07-30-2004, 12:21 PM

my grandmother bought my car for me too and my brother

Civic_RedLine · 07-30-2004, 04:43 PM

cool =) I wanted the 2001+ civics because they look nicer in my opionion.

I cant find the bolts. All I could find was the rails that the seats moves in... any more help please?

The problems arent big. I just get paranoid about every little thing.

blind34_1 · 07-30-2004, 05:55 PM

i haven't messed with a 01 civic, so I'm guesssing, but try feeling underneath the carpet. sometimes you have to pull up the carpet a little bit, because they like to hide the bolts for cosmetic purposes. There should be two bolts towards the corners of the seat, on the floor. There should also be some towards the corners on the back of the seat, towards floor.

07-30-2004, 01:32 AM	#1
Civic_RedLine 3rd Gear Join Date: Jul 2004 Location: Los Angeles Posts: 352	Civic Coupe Driver Seat Whoever has the civic 2001 coupe can you please tell me where the screws to the seat are located? My driver side seat wiggles like a computer chair that has loose bolts. My car seat wiggles back and forth especially when I shift hard... so can anyone help me out on what type of socket I need in order to tighten the bolts and also where it is located? Thanks for any help

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-30-2004, 09:42 AM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	10-12mm bolts, no screws. There would be 4 of them - on the floor - you cant miss them. If theyre tight, maybe remove the seat (dont forget to disconnect the seatbelt sensor clip (cant miss that either)) and check the bolts under the rails that hold the actual seat. Can you move the seat w/ your hands when its not moving? (why did you buy this car if all you ever say about it are the problems?)

07-30-2004, 09:49 AM	#3
Civic_RedLine 3rd Gear Join Date: Jul 2004 Location: Los Angeles Posts: 352	slight problems... I got it for 8500 flat no tax no nothing cuz he did it as a give... the car came with 40k mileage that is a good deal compared to certified 2001 with 40k for 15 thousand dollars.. Yes if I swing hard enough the chair goes back and forth not that much though but it does move a little .

07-30-2004, 09:55 AM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Which part of the seat is actually moving when you push on it? That will tell you what needs to be tightened. (If I were you Id fix all these little things cheaply and sell it for more than you paid and get a later model 6th gen civic w/ less problems but maybe higher miles. Just my opinion)

07-30-2004, 10:04 AM	#6
Civic_RedLine 3rd Gear Join Date: Jul 2004 Location: Los Angeles Posts: 352	the guy wanted 10k but I kept lowering an dlowering to 8500 cuz of the little defects it had... I cant sell it because my grandma bought it for me.

07-30-2004, 12:21 PM	#7
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	my grandmother bought my car for me too and my brother

07-30-2004, 04:43 PM	#8
Civic_RedLine 3rd Gear Join Date: Jul 2004 Location: Los Angeles Posts: 352	cool =) I wanted the 2001+ civics because they look nicer in my opionion. I cant find the bolts. All I could find was the rails that the seats moves in... any more help please? The problems arent big. I just get paranoid about every little thing.

07-30-2004, 05:55 PM	#9
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 40 Posts: 1,813	i haven't messed with a 01 civic, so I'm guesssing, but try feeling underneath the carpet. sometimes you have to pull up the carpet a little bit, because they like to hide the bolts for cosmetic purposes. There should be two bolts towards the corners of the seat, on the floor. There should also be some towards the corners on the back of the seat, towards floor.