.:HSTuners::

07-26-2003, 04:39 PM

I want to and a sub and a amp to my stock head unit (99 Accord EX) 1: are there pre outs on this head unit 2: where on the web can I find schematics 3: any suggestions on a setup my current setup consists of stock fronts and sony xplod 3way 6x9 rear. This is weak the fronts carry all my bass and over power the rears

Thx Mullen........

ShagginJet · 07-30-2003, 06:47 PM

^^This topic has come up so many times already.... use the search button at the top and search for sub or something. It's easy but you need to just do some research.

08-01-2003, 04:26 PM

1) no theres not any pre outs on your stock deck
ethier find an amp with a high level input or if it doesn't have one get a high level adapter. Both work off the back speakers.
you'll have to run the remote wire to the fuse panel.

2)what do you need them for?

3)get a descent component set for the fronts

07-26-2003, 04:39 PM	#1
mullen Posts: n/a	Adding an amp and sub? I want to and a sub and a amp to my stock head unit (99 Accord EX) 1: are there pre outs on this head unit 2: where on the web can I find schematics 3: any suggestions on a setup my current setup consists of stock fronts and sony xplod 3way 6x9 rear. This is weak the fronts carry all my bass and over power the rears Thx Mullen........

07-30-2003, 06:47 PM	#2
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	^^This topic has come up so many times already.... use the search button at the top and search for sub or something. It's easy but you need to just do some research. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-01-2003, 04:26 PM	#3
travismitchell Posts: n/a	1) no theres not any pre outs on your stock deck ethier find an amp with a high level input or if it doesn't have one get a high level adapter. Both work off the back speakers. you'll have to run the remote wire to the fuse panel. 2)what do you need them for? 3)get a descent component set for the fronts