.:HSTuners::

09-20-2003, 08:18 PM

I HAVE A 93 CIVIC WITH A B18C1. I MAY BE GETTING A 93 TEG LS. SO MY QUESTION IS WILL MY HEAD FIT ONTO THE LS? AND WHAT ALL WORK WILL NEED TO DO TO THE BLOCK?

09-21-2003, 03:01 AM

You can put any b-series head on any b-series engine. You'll have to get a steel braided oil line, fittings, and a T joint to run the oil from the block (oil press. sender hole) to the VTEC Solenoid.You need to tap and seal an oil-line on the back distributor side of the head (shown in pic) and bore out two of the dowel pin holes on your new head. The dowel pins on the b18a1 (on ls block) are in the Back but the ones on the VTEC heads are on the Front so you need to enlarge the ones on the back of the head to 14mm to match your block (shown as #1 and #4 on the pic ). you will need new head bolts the b18c1 Ecu and of course new head gasket. Good luck, nice pick of new car.

MAXed Out · 10-07-2003, 09:42 AM

Yes it will fit.

2ndGenTeg · 10-10-2003, 11:49 PM

LOL- yeah it will fit, have someone else do the work, and no matter what anyone tells you, never spin it past 8000 RPM, fully built, or 6800 with stock internals.

10-07-2003, 09:42 AM	#3
MAXed Out 6th Gear Join Date: Jan 2003 Location: Cleveland, OH Age: 38 Posts: 1,974	Yes it will fit. __________________ SHIFT_MyNuts Some people call it an obsession I just call it my maxima 1997 Maxima SE 5spd, Stillen Body Kit, Warpspeed Y & B pipes, Magnaflow Muffler, Koni Yellows & Tein S-tech springs, JVC Headunit, Directed 7" in dash screen,Stillen Intake, red/clear tail lights, AE mod, Paceseter STS, EL-Glow Gauges, Clutchmasters FX300 Clutch, rebuilt tranny, 19" Mille Miglia Evo 5's with Pirelli Pzero's(summer), 18" Hp D-10 hyper silver wrapped in Goodyear ultra HPR, SPW front strut bar, Helios 7000k HID, Motostorm UDP, Viper 5000Vx alarm, 2 12" PowerClass 124 subs, Kenwood 1200 Watt amp, DVD Changer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-20-2003, 08:18 PM	#1
RONI UNDERWOOD Posts: n/a	Motors I HAVE A 93 CIVIC WITH A B18C1. I MAY BE GETTING A 93 TEG LS. SO MY QUESTION IS WILL MY HEAD FIT ONTO THE LS? AND WHAT ALL WORK WILL NEED TO DO TO THE BLOCK?

10-10-2003, 11:49 PM	#4
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 44 Posts: 830	LOL- yeah it will fit, have someone else do the work, and no matter what anyone tells you, never spin it past 8000 RPM, fully built, or 6800 with stock internals.