.:HSTuners::

1995CivicSi · 09-21-2005, 10:11 PM

ok so i baught a 1995 civic si motor is the D16Z6 Vtec, and am repairing it now, i start my car and my engine light is on, and when i rev it it wont go past 4000rpm it boggs out, so people told me to look for a 2 pin connector under dash so i found a blue one (but apparently its suppose to be a grey one in the 92-95 civics correct?) and so i did the pin (a paper clip) in the 2 pin conector and instead of my engine light giving me the code, its my SRS (airbag) light giving me a code of 11 , 1 long blink 1 short, and then lights up and stays there, and there is no such code 11, can someone help me out with this? thanks guys i appreciate it.

*ChrisCantSkate* · 09-21-2005, 11:56 PM

theres another one under there... keep looking

1995CivicSi · 09-22-2005, 12:14 AM

its actually a BLUE connector, someone posted that its a grey one but it is a blue one the one i was testing, but apprently i have a wiring issue or something ????

thermal · 09-27-2005, 10:13 PM

First thing is first. Reset the ECU. See if this CEL comes back. If it does, then proceed to start counting those blinks. Yes it shold be a blue one with 2 wires going into it.

Look into this also:
http://www.hstuners.com/forums/showt...&threadid=2300

09-21-2005, 10:11 PM	#1
1995CivicSi Parked Join Date: Sep 2005 Age: 40 Posts: 2	How To Check CEL CODE? ok so i baught a 1995 civic si motor is the D16Z6 Vtec, and am repairing it now, i start my car and my engine light is on, and when i rev it it wont go past 4000rpm it boggs out, so people told me to look for a 2 pin connector under dash so i found a blue one (but apparently its suppose to be a grey one in the 92-95 civics correct?) and so i did the pin (a paper clip) in the 2 pin conector and instead of my engine light giving me the code, its my SRS (airbag) light giving me a code of 11 , 1 long blink 1 short, and then lights up and stays there, and there is no such code 11, can someone help me out with this? thanks guys i appreciate it.

09-21-2005, 11:56 PM	#2
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	theres another one under there... keep looking __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

09-27-2005, 10:13 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	First thing is first. Reset the ECU. See if this CEL comes back. If it does, then proceed to start counting those blinks. Yes it shold be a blue one with 2 wires going into it. Look into this also: http://www.hstuners.com/forums/showt...&threadid=2300 __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-22-2005, 12:14 AM	#3
1995CivicSi Parked Join Date: Sep 2005 Age: 40 Posts: 2	its actually a BLUE connector, someone posted that its a grey one but it is a blue one the one i was testing, but apprently i have a wiring issue or something ????