.:HSTuners::

04-15-2003, 05:43 PM

hi,
I have a 1990 Integra GS, i've had it for about a month now, and today i took the left wheel off and noticed that about on the inside part (about 1-1/2 inches) is completely bald, but the rest of the tire is fine... i looked at the back tire on the same side (left side) and it has the exact same thing. My tires on the right side are just fine, all even. but these on the left, they have this area on the inside which is completely balded. My mechanic has told me earlier that i need a rack and pinion job, my alignment is a tiny bit off, and my rotors are slightly warped (these are the problems that I know of).

anyone have any ideas as to what might be causing this?

TeriyakiBroccoli · 04-15-2003, 07:08 PM

hmm, take it to the alignment shop and try get it diagnosed there.

ebpda9 · 04-15-2003, 08:02 PM

so the insides are worn. is the car leaning to the right ???

04-15-2003, 08:41 PM

the car does pull to the right whenever i hit the brakes

Racing Rice · 04-15-2003, 09:28 PM

Definately take it up to the alignment shop and have it checked out.

04-20-2003, 01:59 PM

Worn suspension components bushings, etc. May be a problem here.

When you are on the rack for an alignment, they should check for abnormal play in the suspension components.

Better yet take this car to the body shop and see if it was hit on that side.

Your frame may have been tweaked, and for these type of repairs most body shops will send the car off for an alignment to get it as close as they can, adding camber correction kits are usually never done, to save money and time.

pimpinprelude · 05-19-2003, 06:09 PM

hummmmm the car could be heavy on one side?? do you have a fat g/f??

ebpda9 · 05-19-2003, 06:58 PM

not the gf comment. i noticed that on hondas the crossbones thend to slip to the left causing more negative camber on the left wheels and the front right caster angle tends to get smaller causing the car to pull, and be unstable at higher speeds. any of that happened to you ?

04-15-2003, 05:43 PM	#1
rody084 Posts: n/a	weird wear on my left side tires... hi, I have a 1990 Integra GS, i've had it for about a month now, and today i took the left wheel off and noticed that about on the inside part (about 1-1/2 inches) is completely bald, but the rest of the tire is fine... i looked at the back tire on the same side (left side) and it has the exact same thing. My tires on the right side are just fine, all even. but these on the left, they have this area on the inside which is completely balded. My mechanic has told me earlier that i need a rack and pinion job, my alignment is a tiny bit off, and my rotors are slightly warped (these are the problems that I know of). anyone have any ideas as to what might be causing this?

04-15-2003, 07:08 PM	#2
TeriyakiBroccoli 5th Gear Join Date: Sep 2002 Location: Orange County, Southern California Age: 38 Posts: 1,490	hmm, take it to the alignment shop and try get it diagnosed there. __________________ everyone loves the turbizzim.

04-15-2003, 08:02 PM	#3
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	so the insides are worn. is the car leaning to the right ??? __________________

04-15-2003, 09:28 PM	#5
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 45 Posts: 7,985	Definately take it up to the alignment shop and have it checked out. __________________ Racing Rice

05-19-2003, 06:58 PM	#8
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	not the gf comment. i noticed that on hondas the crossbones thend to slip to the left causing more negative camber on the left wheels and the front right caster angle tends to get smaller causing the car to pull, and be unstable at higher speeds. any of that happened to you ? __________________

04-15-2003, 08:41 PM	#4
rody084 Posts: n/a	the car does pull to the right whenever i hit the brakes

04-20-2003, 01:59 PM	#6
Dezoris Posts: n/a	Worn suspension components bushings, etc. May be a problem here. When you are on the rack for an alignment, they should check for abnormal play in the suspension components. Better yet take this car to the body shop and see if it was hit on that side. Your frame may have been tweaked, and for these type of repairs most body shops will send the car off for an alignment to get it as close as they can, adding camber correction kits are usually never done, to save money and time.

05-19-2003, 06:09 PM	#7
pimpinprelude Registered User Join Date: Mar 2003 Location: Atlanta Age: 37 Posts: 1,325	hummmmm the car could be heavy on one side?? do you have a fat g/f??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode