.:HSTuners::

10-03-2003, 02:23 PM

yeah im looking to go turbo after i get my new motor and i was wondering is a t20 or t25 turbo any good or should i go with something better. suggestions welcome.

thermal · 10-11-2003, 09:45 AM

definitely bigger with your B16A. i'm not sure if there is even a T20 but i know that a T25 will be small. It will work but it will not be a potentially efficient than a T3T4e hybrid. That is my minimum recommendation for a B16A set-up.

10-20-2003, 06:35 AM

hey thanks man and yes they do make a t20. turbo specialties makes it just some FYI.

thermal · 10-21-2003, 07:52 PM

cool. just make sure you keep on doing research. fuel is a major concern. i still say go with at least a t3t04e trim. it you review the compressor chart, that is one of the most efficient one to slap on a street B16.... goodluck man

10-23-2003, 05:17 AM

hey thanks again and i found a turbo kit that is alot better than the ones i origanally thought about. go here to see the turbo i decided on greddy

now once iget the turbo where would be a good place to go for an inter cooler kit for 91 civic with a b16 motor?

sohc_vtec 2NR · 10-23-2003, 09:17 PM

can't really go wrong with greddy products..

thermal · 10-23-2003, 09:22 PM

Yep, those are great street turbos. Contact hondaman-iac on this board. He might be able to get that for you cheaper than that site. As far as intercooler goes, I prefer custom. Any kits from any company are very expensive. I spent $250 for my FMIC and about $60 for piping. Most kits out there will cost you over $400 easily. Here's a pic of my FMIC with the bumper off:

I bought that FMIC from: http://www.speedpartsrus.com The person's name is Anthony. He is very realiable and ships items quick.

Here's another great place to buy an intercooler almost similar to mine: http://www.johnnyracecar.com

11-06-2003, 10:48 PM

I have an intercooler on the way from Johnnyracecar.com... He has a sale going on right now, 190 for a 5" tall ic, $210 for a 6". I sent him 190, supposedly he is going to ship everything out on the 10th.

check out the site for the specifics. While your at it, find out what his email addy is, I couldn't use the email link.

11-14-2003, 06:13 PM

Got the IC, it is NICE! quick shipping, good communication, johnnyracecar.com is a good choice, imo.

thermal · 11-16-2003, 01:23 AM

yep, those are great peeps there.

11-16-2003, 02:13 AM

Car is looking good man, car's lookin good. I need a life transplant...anyone know where I can get one ??

Drew

thermal · 11-16-2003, 10:01 AM

Sup drew. Do u mean you need a new engine?

11-18-2003, 02:20 AM

nah a new motor would be a piece of cake...I need a new life...

cougarsvt · 12-13-2003, 04:34 PM

What Turbo goes with the Greddy Kit?

T28 is too small.....

thermal · 12-13-2003, 07:09 PM

Quote:

Originally posted by cougarsvt
What Turbo goes with the Greddy Kit?

T28 is too small.....

GReddy on hondas:
92-95 civic SOHC TD04H-15g
96-00 civic SOHC TD04H-19t
All DOHC VTEC is TD05-18g

T-28 on what car?

cougarsvt · 12-14-2003, 11:51 AM

To small for even for my Cougar. Those would be good for being setup as twins...like the Nissan 300Z.

thermal · 01-02-2004, 05:37 AM

why not use your T3T4?

10-03-2003, 02:23 PM	#1
nosaj81_2000 Posts: n/a	looking to go turbo yeah im looking to go turbo after i get my new motor and i was wondering is a t20 or t25 turbo any good or should i go with something better. suggestions welcome.

10-11-2003, 09:45 AM	#2
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	definitely bigger with your B16A. i'm not sure if there is even a T20 but i know that a T25 will be small. It will work but it will not be a potentially efficient than a T3T4e hybrid. That is my minimum recommendation for a B16A set-up. __________________ Project Teg Visit the Turbo Forum

10-21-2003, 07:52 PM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	cool. just make sure you keep on doing research. fuel is a major concern. i still say go with at least a t3t04e trim. it you review the compressor chart, that is one of the most efficient one to slap on a street B16.... goodluck man __________________ Project Teg Visit the Turbo Forum

10-23-2003, 09:17 PM	#6
sohc_vtec 2NR Registered User Join Date: Dec 2002 Location: Kenosha, WI Age: 39 Posts: 1,137	can't really go wrong with greddy products.. __________________ RICE....is good

10-23-2003, 09:22 PM	#7
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Yep, those are great street turbos. Contact hondaman-iac on this board. He might be able to get that for you cheaper than that site. As far as intercooler goes, I prefer custom. Any kits from any company are very expensive. I spent $250 for my FMIC and about $60 for piping. Most kits out there will cost you over $400 easily. Here's a pic of my FMIC with the bumper off: I bought that FMIC from: http://www.speedpartsrus.com The person's name is Anthony. He is very realiable and ships items quick. Here's another great place to buy an intercooler almost similar to mine: http://www.johnnyracecar.com __________________ Project Teg Visit the Turbo Forum

10-20-2003, 06:35 AM	#3
nosaj81_2000 Posts: n/a	hey thanks man and yes they do make a t20. turbo specialties makes it just some FYI.

10-23-2003, 05:17 AM	#5
nosaj81_2000 Posts: n/a	hey thanks again and i found a turbo kit that is alot better than the ones i origanally thought about. go here to see the turbo i decided on greddy now once iget the turbo where would be a good place to go for an inter cooler kit for 91 civic with a b16 motor?

11-06-2003, 10:48 PM	#8
hooohaa2 Posts: n/a	I have an intercooler on the way from Johnnyracecar.com... He has a sale going on right now, 190 for a 5" tall ic, $210 for a 6". I sent him 190, supposedly he is going to ship everything out on the 10th. check out the site for the specifics. While your at it, find out what his email addy is, I couldn't use the email link.

11-14-2003, 06:13 PM	#9
hooohaa2 Posts: n/a	Got the IC, it is NICE! quick shipping, good communication, johnnyracecar.com is a good choice, imo.

11-16-2003, 01:23 AM	#10
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	yep, those are great peeps there. __________________ Project Teg Visit the Turbo Forum

11-16-2003, 02:13 AM	#11
Dr Drew Posts: n/a	Car is looking good man, car's lookin good. I need a life transplant...anyone know where I can get one ?? Drew

11-16-2003, 10:01 AM	#12
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Sup drew. Do u mean you need a new engine? __________________ Project Teg Visit the Turbo Forum

11-18-2003, 02:20 AM	#13
Dr Drew Posts: n/a	nah a new motor would be a piece of cake...I need a new life...

12-13-2003, 04:34 PM	#14
cougarsvt 1st Gear Join Date: May 2003 Location: Dayton, ohio Age: 49 Posts: 30	What Turbo goes with the Greddy Kit? T28 is too small..... __________________ Authorizes Turbonetics Dealer T3/T4E Hybrid,stageIII turbine, 50 trim, 0.48 Exh, Ball Bearing $1,050.00 T3/T4E Hybrid,stageIII Turbine,50 trim, 0.48 Exh, std series $700.00 Full Complete Turbo Kits For $3,000.00 From Turbonetics with a Ball Bearing Turbo!! Spearco IC's from $200.00 Deltagate EVO for $200.99 PHONE #: 937-336-1462 Open for calls Monday-Sat Til 5:00PM Stephen N Brown Owner of Top Performance

12-14-2003, 11:51 AM	#16
cougarsvt 1st Gear Join Date: May 2003 Location: Dayton, ohio Age: 49 Posts: 30	To small for even for my Cougar. Those would be good for being setup as twins...like the Nissan 300Z. __________________ Authorizes Turbonetics Dealer T3/T4E Hybrid,stageIII turbine, 50 trim, 0.48 Exh, Ball Bearing $1,050.00 T3/T4E Hybrid,stageIII Turbine,50 trim, 0.48 Exh, std series $700.00 Full Complete Turbo Kits For $3,000.00 From Turbonetics with a Ball Bearing Turbo!! Spearco IC's from $200.00 Deltagate EVO for $200.99 PHONE #: 937-336-1462 Open for calls Monday-Sat Til 5:00PM Stephen N Brown Owner of Top Performance

01-02-2004, 05:37 AM	#17
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	why not use your T3T4? __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode