.:HSTuners::

10-31-2004, 02:34 PM

I have a ? about this gsr its a 2dr and a 1998. Well I was wondering at idle speed the engine jumps for some reason. But its continous, while its idling what is the problem?

*pdiggitydogg* · 10-31-2004, 03:28 PM

see this thread
http://www.hstuners.com/forums/showt...threadid=22877

"Try cleaning your iacv"

10-31-2004, 08:34 PM

the rpms do not change though could this be a motor mount problem?

IALuder · 10-31-2004, 11:56 PM

you mean the motor it self jumps. off the motor mount?

11-01-2004, 12:12 AM

yeah, just the motor, I didnt see if it jumped off the motor mounts, but yes just the engine jerks, but you can feel it when you come to a stop. the car kinda jerks too, but i seen its just the engine, but most likely its a motor mount?

C's 94 InTeGrA · 11-01-2004, 11:18 AM

Sounds like it to me.

ebpda9 · 11-01-2004, 10:36 PM

sound to me like the car is running a bit rough. how's the acceleration ?

11-01-2004, 11:26 PM

runs fine, just engine jerks at idle

ebpda9 · 11-02-2004, 08:21 AM

my suggestion is do a tuneup before doing anything else. i doubt the mounts are that bad. my 92 does the same thing.

ShEaNy · 11-02-2004, 03:18 PM

whens the last time its had a oil change and everything else checked and replaced? wires,plugs, etc I dont think its a mount...
prolly just mechanical crap..

thermal · 11-23-2004, 04:34 AM

I'm with hondaman-iac. Get a tune up. If the problem still exist, then you may have a more extensive problem. As sheany said, do an oil change as well. Inspect the oil. Check if you have any metallic particles. Goodluck

MissJDM · 11-27-2004, 11:56 PM

Quote:

Originally posted by thermalfi'd16
I'm with hondaman-iac. Get a tune up. If the problem still exist, then you may have a more extensive problem. As sheany said, do an oil change as well. Inspect the oil. Check if you have any metallic particles. Goodluck

I never knew your signature was a freakin link! Anyhow, I checked it out, nice cars, very clean

I also noticed on the integra site that your future mod may be sleeves. Well, well, well, have I told you that I happen to have Darton Sleeves for a b18 for sale?

thermal · 11-28-2004, 09:22 AM

OT: MissJDM, I already have my motor sleeved. Check out the turbo forum to see updates on my ride. Have you decided on what motor to use yet? K-series or B-series? Later....

MissJDM · 11-28-2004, 05:38 PM

Damn.

I haven't decided yet, believe it or not, it's a tough choice. If money wasn't an issue whatsoever, it's more than obvious what I would go with..but I'm trying to think.. with XXX money, I can have my motor fully built again with the b20, or with that same XXX amount of money, i could have a kswap with less mods..I'll keep ya posted.

Nice Cars.
What;s your nationality, btw?

thermal · 12-11-2004, 08:35 AM

OT: MissJDM, I'm Filipino.... and you? Have you ever dealt with Rocket of rocket motorsports? He sponsored my buddy and is really great with tech help. He was gonna sleeve my motor but he referred me to an east coast friend of his which is Brad of RLZ engineering. Anyway, Rocket has some really powerful K-series stuff. My buddy is trying to break the all-motor street class record on the east coast. Rocket, Omni, and RLZ is helping him. Once we get his ugly CRX painted, I'll post pics... lol.

MissJDM · 12-11-2004, 04:58 PM

It only took you 8743589347 years to respond.

Filipino, ah, my boyfriend, too, is Pinoy. I'm Vietnamese..I hope we'll make pretty babies. lol. jaykay jaykay. Anyway, I'm slowly going back to my b20 plan. K series is a little too much for me right now, I'd have to read more on it, plus I need to get my motor up and running soon. [sigh] I sure know I'm gonna regret this. lol. It's okay, as long as the b2 pulls good times, I'm sure I wont go to the extent of crying.

thermal · 12-11-2004, 05:23 PM

lol..... sorry, I was doing this: http://www.hstuners.com/forums/showt...368#post255368

With all that stuff you already have, that B20 will surely kick ass...

MissJDM · 12-11-2004, 05:55 PM

Ohhh!

Well, in that case, welcome back!

thermal · 12-11-2004, 09:59 PM

thanks

10-31-2004, 02:34 PM	#1
luvmy96honda Posts: n/a	Going to buy a acura gsr I have a ? about this gsr its a 2dr and a 1998. Well I was wondering at idle speed the engine jumps for some reason. But its continous, while its idling what is the problem?

10-31-2004, 08:34 PM	#3
luvmy96honda Posts: n/a	hey man the rpms do not change though could this be a motor mount problem?

10-31-2004, 11:56 PM	#4
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	you mean the motor it self jumps. off the motor mount? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

11-01-2004, 11:18 AM	#6
C's 94 InTeGrA 4th Gear Join Date: Jan 2002 Location: Dover, Ohio Age: 40 Posts: 858	Sounds like it to me. __________________ 2003 Apex Silver Mitsubishi Evolution 8

11-01-2004, 10:36 PM	#7
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	sound to me like the car is running a bit rough. how's the acceleration ? __________________

10-31-2004, 03:28 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	see this thread http://www.hstuners.com/forums/showt...threadid=22877 "Try cleaning your iacv"

11-01-2004, 12:12 AM	#5
luvmy96honda Posts: n/a	yeah, just the motor, I didnt see if it jumped off the motor mounts, but yes just the engine jerks, but you can feel it when you come to a stop. the car kinda jerks too, but i seen its just the engine, but most likely its a motor mount?

11-01-2004, 11:26 PM	#8
luvmy96honda Posts: n/a	runs fine, just engine jerks at idle

11-02-2004, 08:21 AM	#9
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	my suggestion is do a tuneup before doing anything else. i doubt the mounts are that bad. my 92 does the same thing. __________________

11-02-2004, 03:18 PM	#10
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 40 Posts: 3,821	whens the last time its had a oil change and everything else checked and replaced? wires,plugs, etc I dont think its a mount... prolly just mechanical crap..

11-23-2004, 04:34 AM	#11
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	I'm with hondaman-iac. Get a tune up. If the problem still exist, then you may have a more extensive problem. As sheany said, do an oil change as well. Inspect the oil. Check if you have any metallic particles. Goodluck __________________ Project Teg Visit the Turbo Forum

11-28-2004, 09:22 AM	#13
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	OT: MissJDM, I already have my motor sleeved. Check out the turbo forum to see updates on my ride. Have you decided on what motor to use yet? K-series or B-series? Later.... __________________ Project Teg Visit the Turbo Forum

11-28-2004, 05:38 PM	#14
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	Damn. I haven't decided yet, believe it or not, it's a tough choice. If money wasn't an issue whatsoever, it's more than obvious what I would go with..but I'm trying to think.. with XXX money, I can have my motor fully built again with the b20, or with that same XXX amount of money, i could have a kswap with less mods..I'll keep ya posted. Nice Cars. What;s your nationality, btw? __________________ you say it best when you say nothing at all

12-11-2004, 08:35 AM	#15
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	OT: MissJDM, I'm Filipino.... and you? Have you ever dealt with Rocket of rocket motorsports? He sponsored my buddy and is really great with tech help. He was gonna sleeve my motor but he referred me to an east coast friend of his which is Brad of RLZ engineering. Anyway, Rocket has some really powerful K-series stuff. My buddy is trying to break the all-motor street class record on the east coast. Rocket, Omni, and RLZ is helping him. Once we get his ugly CRX painted, I'll post pics... lol. __________________ Project Teg Visit the Turbo Forum

12-11-2004, 04:58 PM	#16
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	It only took you 8743589347 years to respond. Filipino, ah, my boyfriend, too, is Pinoy. I'm Vietnamese..I hope we'll make pretty babies. lol. jaykay jaykay. Anyway, I'm slowly going back to my b20 plan. K series is a little too much for me right now, I'd have to read more on it, plus I need to get my motor up and running soon. [sigh] I sure know I'm gonna regret this. lol. It's okay, as long as the b2 pulls good times, I'm sure I wont go to the extent of crying. __________________ you say it best when you say nothing at all

12-11-2004, 05:23 PM	#17
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	lol..... sorry, I was doing this: http://www.hstuners.com/forums/showt...368#post255368 With all that stuff you already have, that B20 will surely kick ass... __________________ Project Teg Visit the Turbo Forum

12-11-2004, 05:55 PM	#18
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	Ohhh! Well, in that case, welcome back! __________________ you say it best when you say nothing at all

12-11-2004, 09:59 PM	#19
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	thanks __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode