.:HSTuners::

10-30-2002, 10:52 PM

I have been told by alot of my friends for me to get new Cam Gears and a Pulley set. But I do not know if they are worth getting or not? Can anyone tell me if they are worth getting, and recommend a brand to get.

Daniel

a96710 · 10-30-2002, 11:06 PM

I did the AEM Power Pulley set that comes with a PS pulley and alternator pulley. I noticed a lil quicker throttle response. Cam gears...you should get upgraded cam shafts at the same time to get the most benefit

10-31-2002, 02:34 PM

well the pulleys are only about 90 bucks and you will free up like 3 hp I mean hell yeah it be worht it how much hp do you get from a 300 dollar header???? like 3 or so. With teh cam gear unless you go to a dyno to set it rigt its pretty much useless.

thermal · 11-01-2002, 04:13 AM

nah get a turbo kit instead. even nitrous. i mean, a 3-5 hp gain is not noticable. just my 2 lincoln

11-01-2002, 03:29 PM

Quote:

Originally posted by a96710
I did the AEM Power Pulley set that comes with a PS pulley and alternator pulley. I noticed a lil quicker throttle response. Cam gears...you should get upgraded cam shafts at the same time to get the most benefit

i agree...cam gears are gonna match ur cam timing to ur engine tuning. and by upgrading the shafts at the same time...ull see an more of a difference. the pulleys are nice because they reduce the power required to drive misc. things and allows for more horsepower at the wheels. and theres no reason that u couldnt do this AND turbo ur car...ull see a benefit whether ur car is stock, n/a, modded or f/i.

-amy

*Addict* · 11-03-2002, 10:33 AM

Keep in mind that if you do change out the pullies, you can't run a stereo system greater than 300 watts(per AEM anyhow). Just a thought.

Kyle · 11-03-2002, 11:42 AM

Quote:

Originally posted by Civic_Addict
Keep in mind that if you do change out the pullies, you can't run a stereo system greater than 300 watts(per AEM anyhow). Just a thought.

That sucks...

a96710 · 11-03-2002, 07:59 PM

I run a JL 300/4 that runs 75x4 and I'm sure that's wahy under rated. I run 2 Boston components and an 8000 series MTX 12" and my lights don't dim anything. I probably wouldn't try to run much more though

ShagginJet · 11-04-2002, 01:04 AM

If you're going to put in a sterio system, you should upgrade the alternator anyways.

11-04-2002, 04:24 PM

Yes it is worth getting. Your gonna need better cams and pulley kit to work on the horsepower you got. the stock ones wont be as good, and the camshaft could break because of too much power. Skunk 2 has some good cams. Unorthodox racing also has cams and pulley kits.

10-30-2002, 10:52 PM	#1
deege918 Posts: n/a	Cam Gears and Pulley Set. Are they worth getting? I have been told by alot of my friends for me to get new Cam Gears and a Pulley set. But I do not know if they are worth getting or not? Can anyone tell me if they are worth getting, and recommend a brand to get. Daniel

11-01-2002, 04:13 AM	#4
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	nah get a turbo kit instead. even nitrous. i mean, a 3-5 hp gain is not noticable. just my 2 lincoln __________________ Project Teg Visit the Turbo Forum

11-04-2002, 01:04 AM	#9
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	If you're going to put in a sterio system, you should upgrade the alternator anyways. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-30-2002, 11:06 PM	#2
a96710 Registered User Join Date: Oct 2002 Location: Vancouver, Wa Age: 43 Posts: 1,454	I did the AEM Power Pulley set that comes with a PS pulley and alternator pulley. I noticed a lil quicker throttle response. Cam gears...you should get upgraded cam shafts at the same time to get the most benefit

10-31-2002, 02:34 PM	#3
Honda530 Posts: n/a	well the pulleys are only about 90 bucks and you will free up like 3 hp I mean hell yeah it be worht it how much hp do you get from a 300 dollar header???? like 3 or so. With teh cam gear unless you go to a dyno to set it rigt its pretty much useless.

11-03-2002, 07:59 PM	#8
a96710 Registered User Join Date: Oct 2002 Location: Vancouver, Wa Age: 43 Posts: 1,454	I run a JL 300/4 that runs 75x4 and I'm sure that's wahy under rated. I run 2 Boston components and an 8000 series MTX 12" and my lights don't dim anything. I probably wouldn't try to run much more though

11-04-2002, 04:24 PM	#10
DSM_Tuner Posts: n/a	Yes it is worth getting. Your gonna need better cams and pulley kit to work on the horsepower you got. the stock ones wont be as good, and the camshaft could break because of too much power. Skunk 2 has some good cams. Unorthodox racing also has cams and pulley kits.