starter kill wiring

hey geniuses,
i'm trying to install a starter kill switch in my 97 civic lx and i have no idea which wire is which. For example, what does the wire that runs to the starter solenoid or starter relay look like, what wire would i use that carries +12 volts when the ignition in the ON AND START positions? Where are these? And finally, where can ground my wire from underneath the dashboard? I would love any replies, thanks.
Jon

hmm guess i missed this post.... ground behind the kickpanel

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |
|              12V|white               |+  |ignition harness            |
|          STARTER|black/white         |+  |ignition harness            |
|         IGNITION|black/yellow        |+  |ignition harness            |
|  SECOND IGNITION|yellow              |+  |ignition harness            |
|        ACCESSORY|white/black         |+  |ignition harness            |
|       POWER LOCK|green/white         |-  |blue plug dkp or *2         |
|     POWER UNLOCK|green/orange*3      |-  |blue plug dkp or *2         |
| PARKING LIGHTS +|red/black           |   |dkp/fuse box or *4          |
| PARKING LIGHTS -|                    |   |                            |
|       HEADLIGHTS|red/wht(L)red/blu(H)|+  |steering column             |
|     DOOR TRIGGER|lt. green/red*5     |-  |factory alarm plug*2        |
|  TRUNK/HATCH PIN|blue/blk*6          |-  |dkp, harness to rear        |
|         HOOD PIN|                    |   |                            |
|TRNK/HTCH RELEASE|                    |   |                            |
|  FCTRY ALARM ARM|                    |   |                            |
|FCTRY ALRM DISARM|                    |   |                            |
|       TACHOMETER|blue                |   |test connector*1            |
|       BRAKE WIRE|green/white         |+  |brake switch                |
|     HORN TRIGGER|gray or blue        |-  |column or*2                 |
|           WIPERS|blue and blue/yellow|-  |steering column             |
|  LF WINDOW UP/DN|red/yellow - red/blu|A  |drivers door                |
|  RF WINDOW UP/DN|blue/yel - blue/org |A  |drivers kick panel          |
|  LR WINDOW UP/DN|grn/yel - green     |A  |dkp, harness to rear        |
|  RR WINDOW UP/DN|yellow - yellow/grn |A  |dkp, harness to rear        |


Notes:
*1 Drivers side fire wall under hood.
*2 Factory alarm plug located behind radio. (green/plug).
*3 Can also use blue/yellow for driver door unlock only.
*4 Male blade terminal at fuse box. Also at the back of the dimmer switch.
*5 Can also be found in a light green plug above the fuse box or bottom of drivers kick, harness to rear. For dome supervision use lt. green/black at factory alarm/keyless plug.
*6 Also available at factory alarm plug. (lt. green).

Dude u are the man!! Where did u learn all of this? Can we give a round of applause ladies and gents? gj!! Thanks for the info

brandon... once again.

hey brandon... how do you code like that? hondaman-iac is trying to put up a table for speaker sizes for a bunch of cars in the sound forum... just curious how you did that.

whatcha mean how do i do code? u mean the UBB?

{code}{/code} replace {} with []

i am the man

testing...

 brandon is god of all things electrical

supa sweet brandon... and easy as well. nice. thanks.

[ebpda9]

Originally posted by Maxvla
brandon... once again.

hey brandon... how do you code like that? hondaman-iac is trying to put up a table for speaker sizes for a bunch of cars in the sound forum... just curious how you did that.

i tried code and it does not work for some reason.