.:HSTuners::

03-07-2004, 01:37 PM

They say it was an easy installation (about 30 mins)..but I dont have any mechanical skill and I dont want to mess things up so can anyone help me out.

#1. Remove throttle cable from OEM rotor.
#2. Unbolt throttle rotor nut from OEM rotor.
#3. place new throttle rotor on toop of the OEM rotor.
#4. bolt new throttle rotor down with rotor nut.
#5. re-install throttle cable onto new rotor.
#6. re-adjust the throttle cable tension
#7. physical & visual inspect accordingly. installation is compelted.

Can anyone give me a more in-depth instruction from this?

03-07-2004, 01:53 PM

seems to me it's really easy...just follow the instructions

94_AcCoRd_EX · 03-07-2004, 02:09 PM

Which part are you confused about?

IALuder · 03-07-2004, 05:23 PM

sounds easy as playing pocket pool.

i dont know what your confused on. but if you trust yourself take it somewhere and have them do it.

ebpda9 · 03-07-2004, 05:24 PM

sounds pretty straight forward to me

03-07-2004, 06:46 PM

well..i dont even know where the OEM throttle rotor is located..lmao

ebpda9 · 03-07-2004, 09:10 PM

lol, take it to a mechanic then.

johnriley · 03-09-2004, 01:17 PM

Haha, this only takes 2 minutes to install lol I'll take some pics and post up.

johnriley · 03-09-2004, 01:27 PM

Check out this thread

http://www.hstuners.com/forums/showt...threadid=17008

03-09-2004, 08:29 PM

i dont understand why would u replace it....more bling bling in teh engine bay or u think your gonna get some hp's out of it??

johnriley · 03-10-2004, 04:04 PM

There is no hp gain from this mod all it does is speed up acceleration by tightening the throttle cable. Decent mod IMO

03-10-2004, 04:23 PM

well..got my WR rotor installed 2 days ago...better throttle respond..but the gas pedal is stiff like hell...i could only push it like for an inch..after that..its a pain to push any farther..therefore I can't go any faster if i cant push the gas pedal..i like the stock throttle rotor better...i could really floor the gas pedal on the stock rotor.

ebpda9 · 03-10-2004, 07:45 PM

loosen up the cable a bit

03-10-2004, 08:17 PM

i did...and actually its worst

94_AcCoRd_EX · 03-10-2004, 08:24 PM

Quote:

Originally posted by F22B2
i did...and actually its worst

Are you positive you installed it correctly? You loosen the throttle cable and it becomes harder to push the pedal?

03-10-2004, 08:34 PM

no..it got softer...but again..i can't floor the gas pedal...and my top speed was like 80

johnriley · 03-11-2004, 12:01 PM

My gas pedal is a little tight but I can push it to the floor and go past 80 no problem you must not have it installed correctly. Can you smoke the tires twice as good now?

03-11-2004, 04:41 PM

I was checking out the WR throttle rotor and comparing it to the OEM one..I found out that it was harder for me to press down on the WR rotor (thus..making it harder to push the pedal...it might be because i'd overtighten the nut of the rotor)...I test out the OEM rotor..and it wasnt hard at all. If you had this mod installed..did you take out that round-flat washer or did you leave it on and installed the WR rotor on top of it?

johnriley · 03-15-2004, 09:05 AM

Yes, you install it on top of it. It just slips right over it and then tighten the nut.

fertooos · 05-15-2020, 08:23 AM

I am very surprised by this information actually. All my life I have been thinking that you cannot post any guns by regular post. Is that legally allowed at all? I will check it in my place, I am from https://worldpostalcode.com/united-s...ington/seattle. But I think you should be physically available during such a purchase. Am I right or not? Thanks for the explanation.

shamsmehra90 · 05-18-2020, 06:05 AM

Hi,
The weapon R piece brings the cable out about half an inch, enough to give it an angle to rub against the rotor.

rajubhaiya · 09-29-2020, 03:04 PM

i dont know what your confused on. but if you trust yourself take it somewhere and have them do it.

rajubhaiya · 09-30-2020, 03:31 AM

Still waiting for someone to help me with the issue

feng090 · 10-21-2020, 10:47 PM

hallohallo

feng090 · 10-21-2020, 10:48 PM

hallohallo hallohallo with the issue

feng090 · 10-21-2020, 10:48 PM

nice to meet you

03-10-2004, 07:45 PM	#13
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	loosen up the cable a bit __________________

05-18-2020, 06:05 AM	#21
shamsmehra90 Registered User Join Date: May 2020 Posts: 1	Hi, The weapon R piece brings the cable out about half an inch, enough to give it an angle to rub against the rotor. Last edited by shamsmehra90 : 06-13-2020 at 09:58 AM.

09-30-2020, 03:31 AM	#23
rajubhaiya Registered User Join Date: Sep 2020 Posts: 2	Still waiting for someone to help me with the issue __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-07-2004, 01:37 PM	#1
F22B2 Posts: n/a	Weapon R Throttle Rotor Installation They say it was an easy installation (about 30 mins)..but I dont have any mechanical skill and I dont want to mess things up so can anyone help me out. #1. Remove throttle cable from OEM rotor. #2. Unbolt throttle rotor nut from OEM rotor. #3. place new throttle rotor on toop of the OEM rotor. #4. bolt new throttle rotor down with rotor nut. #5. re-install throttle cable onto new rotor. #6. re-adjust the throttle cable tension #7. physical & visual inspect accordingly. installation is compelted. Can anyone give me a more in-depth instruction from this?

03-07-2004, 01:53 PM	#2
vtracer20 Posts: n/a	seems to me it's really easy...just follow the instructions

03-07-2004, 02:09 PM	#3
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Which part are you confused about? __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

03-07-2004, 05:23 PM	#4
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	sounds easy as playing pocket pool. i dont know what your confused on. but if you trust yourself take it somewhere and have them do it. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

03-07-2004, 05:24 PM	#5
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	sounds pretty straight forward to me __________________

03-07-2004, 06:46 PM	#6
F22B2 Posts: n/a	well..i dont even know where the OEM throttle rotor is located..lmao

03-07-2004, 09:10 PM	#7
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	lol, take it to a mechanic then. __________________

03-09-2004, 01:17 PM	#8
johnriley 2nd Gear Join Date: Jun 2002 Location: Kansas City, Mo Age: 44 Posts: 211	Haha, this only takes 2 minutes to install lol I'll take some pics and post up.

03-09-2004, 08:29 PM	#10
vtracer20 Posts: n/a	i dont understand why would u replace it....more bling bling in teh engine bay or u think your gonna get some hp's out of it??

03-10-2004, 04:04 PM	#11
johnriley 2nd Gear Join Date: Jun 2002 Location: Kansas City, Mo Age: 44 Posts: 211	There is no hp gain from this mod all it does is speed up acceleration by tightening the throttle cable. Decent mod IMO

03-10-2004, 04:23 PM	#12
F22B2 Posts: n/a	well..got my WR rotor installed 2 days ago...better throttle respond..but the gas pedal is stiff like hell...i could only push it like for an inch..after that..its a pain to push any farther..therefore I can't go any faster if i cant push the gas pedal..i like the stock throttle rotor better...i could really floor the gas pedal on the stock rotor.

03-10-2004, 08:17 PM	#14
F22B2 Posts: n/a	i did...and actually its worst

03-10-2004, 08:34 PM	#16
F22B2 Posts: n/a	no..it got softer...but again..i can't floor the gas pedal...and my top speed was like 80

03-11-2004, 12:01 PM	#17
johnriley 2nd Gear Join Date: Jun 2002 Location: Kansas City, Mo Age: 44 Posts: 211	My gas pedal is a little tight but I can push it to the floor and go past 80 no problem you must not have it installed correctly. Can you smoke the tires twice as good now?

03-11-2004, 04:41 PM	#18
F22B2 Posts: n/a	I was checking out the WR throttle rotor and comparing it to the OEM one..I found out that it was harder for me to press down on the WR rotor (thus..making it harder to push the pedal...it might be because i'd overtighten the nut of the rotor)...I test out the OEM rotor..and it wasnt hard at all. If you had this mod installed..did you take out that round-flat washer or did you leave it on and installed the WR rotor on top of it?

03-15-2004, 09:05 AM	#19
johnriley 2nd Gear Join Date: Jun 2002 Location: Kansas City, Mo Age: 44 Posts: 211	Yes, you install it on top of it. It just slips right over it and then tighten the nut.

05-15-2020, 08:23 AM	#20
fertooos Registered User Join Date: Mar 2020 Posts: 68	I am very surprised by this information actually. All my life I have been thinking that you cannot post any guns by regular post. Is that legally allowed at all? I will check it in my place, I am from https://worldpostalcode.com/united-s...ington/seattle. But I think you should be physically available during such a purchase. Am I right or not? Thanks for the explanation.

09-29-2020, 03:04 PM	#22
rajubhaiya Registered User Join Date: Sep 2020 Posts: 2	i dont know what your confused on. but if you trust yourself take it somewhere and have them do it.

10-21-2020, 10:47 PM	#24
feng090 Registered User Join Date: Oct 2020 Posts: 16	hallohallo

10-21-2020, 10:48 PM	#25
feng090 Registered User Join Date: Oct 2020 Posts: 16	hallohallo hallohallo with the issue