.:HSTuners::::Hondas Wanted:: |
08-29-2004, 09:45 PM
|
#1 |
|
Registered User
Join Date: Apr 2002
Location: Calgary, AB Canada
Age: 40
Posts: 2,962
|
HEEEEELp!!
do i hook up my stereo subs correctly? I have 2 Alpine Type R 12" DVC subs. They are 4+4ohm and i am running a 2 channel phenoix gold amplifier.
The BOTTOM box is the OLD box i had and it pounded like a mother focker. The new box, shown above, is NOT ported and it is alot smaller and i am trying to figure out the correct way to wire the subs. Right now i have it hooked up exactly like the diagram shown beside the top subbox from alpine's website (www.alpine.com). I bridged the outpout and wired it up according to alpine. But for some reason, i cannot seem to get very much bass out of it this way. I played around with my xover freq and gain etc but nothing helped the matter.. ANY IDEAS?!?! |
|
|
|
08-30-2004, 01:09 PM
|
#2 |
|
Registered User
Join Date: Aug 2002
Location: The Bay which holds no water, Palm Bay, Fl
Age: 39
Posts: 1,688
|
so the only thing that has changed is the box?
the bottom box is for SPL so you feel alot of bass, whereas the top box is made for SQ, i would also say to turn the box away from you, so that way the bass will bounce off of the back of the car and will sound better
__________________
A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous |
|
|
|
|
08-30-2004, 04:12 PM
|
#3 |
|
Registered User
Join Date: Apr 2002
Location: Calgary, AB Canada
Age: 40
Posts: 2,962
|
the box is already facing to the rear of the car..thanks
|
|
|
|
|
09-03-2004, 11:39 AM
|
#4 |
|
Registered User
Join Date: Aug 2002
Location: The Bay which holds no water, Palm Bay, Fl
Age: 39
Posts: 1,688
|
it is probably cause the volume of the new box is smaller because of the seperate chambers, was the older box bigger by chance?
bass is the air you feel being pushed by the cone. if the volume behind the cones isn't big enough for the cone, it wont push as much.
__________________
A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous |
|
|
|
|
09-03-2004, 03:25 PM
|
#5 |
|
Registered User
Join Date: Apr 2002
Location: Calgary, AB Canada
Age: 40
Posts: 2,962
|
yeah, its WAY smaller..i'm gonna try to fit my old box into the lude, but i think i have to customize it ALOT
|
|
|
|
|
09-03-2004, 05:08 PM
|
#6 |
|
Registered User
Join Date: Aug 2002
Location: The Bay which holds no water, Palm Bay, Fl
Age: 39
Posts: 1,688
|
yeah, if anything make a custom fibreglass box, that way you can practice with fibreglass, and mold it into the trunk.
EDIT: the trunk in the lude is a litle bit bigger than that of of the accord so i should see no problem
__________________
A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous |
|
|
|
|
09-03-2004, 10:51 PM
|
#7 |
|
Registered User
Join Date: Apr 2002
Location: Calgary, AB Canada
Age: 40
Posts: 2,962
|
WHAT? my accords trunk was alot roomier!!
i know, i want to practice fiberglassing soon |
|
|
|
|
09-03-2004, 11:00 PM
|
#8 |
|
Thought Police
Join Date: Aug 2001
Location: orlando florida
Age: 40
Posts: 9,662
|
personally i'd go down to 1 sub. a preludes trunk is too small for a pre-fab 2 sub box, at least to have the airspace. im running one 10' in a perfect sized box and it hits better than i expected.
__________________
Black Vtec Prelude-h22a power'd  Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold. |
|
|
|
|
09-03-2004, 11:20 PM
|
#9 |
|
Registered User
Join Date: Apr 2002
Location: Calgary, AB Canada
Age: 40
Posts: 2,962
|
yeah, i should build a box sometime soon perhaps...i'm going to try to fit my HUGE ass old box in my trunk and see if it fits, if not..then i'll sell it to the guy who just bought my accord
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
