.:HSTuners::

11-20-2003, 08:56 PM

I have my B16 head at the machine shop and want to know if getting aftermarket valves is worth it and if so what kind and where to buy. I am having the head port matched and bowl cut and Skunk2 Valve train. My setup will be Crower stage II cams 440 injectors I/H/E, ITR manifold and V-AFC. I am going to be using a mugen head gasket to boost compression by .2. Also FPR and fuel rail. And yes I want to go fast.

2ndGenTeg · 11-20-2003, 10:08 PM

I wouldn't waste the money. Get your existing valves re-worked with a 3-angle and call it good. If you feel the need, Ferrea makes a good valve.

11-20-2003, 08:56 PM	#1
Crix Posts: n/a	Need info on new valves for B16a. I have my B16 head at the machine shop and want to know if getting aftermarket valves is worth it and if so what kind and where to buy. I am having the head port matched and bowl cut and Skunk2 Valve train. My setup will be Crower stage II cams 440 injectors I/H/E, ITR manifold and V-AFC. I am going to be using a mugen head gasket to boost compression by .2. Also FPR and fuel rail. And yes I want to go fast.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-20-2003, 10:08 PM	#2
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 44 Posts: 830	I wouldn't waste the money. Get your existing valves re-worked with a 3-angle and call it good. If you feel the need, Ferrea makes a good valve.