.:HSTuners::

10-25-2001, 10:40 PM

im new to hondas (sr20de kid) i was wondering if it is possable to put a sohc vtec head on a dohc d16 out of an first gen integra. thanks for the help, dont grill me to much on the nissan thing.
David

Accord Man · 10-26-2001, 10:25 AM

Hi, welcome to HS!

I believe that conversion can be done..

Read this..

11-04-2001, 11:36 PM

yes it is a possible swap....no crazier than the LS/VTEC. But I am not sure that the gain is worth the trouble....I am not too familiar with the swap...I just know it can be done

slowEJ6 · 11-11-2001, 07:34 PM

DOHC D16? D16's are SOHC engines. you CANNOT mate a SOHC head/block with a DOHC head/block.

now on the other hand, if you mean can you use a SOHC teg block with a SOHC vtec head, then yes you can do so. as long as they are both D series engines you can.

11-11-2001, 08:02 PM

damn my bad.....I did not read the thread close enough....I thought you were talkin bout a SOHC VTEC head on a SOHC nonVTEC block.....hybrid3doorcx is right.....DOHC on SOHC cant be done.

10-25-2001, 10:40 PM	#1
madmoney Posts: n/a	ls/vtec conversion im new to hondas (sr20de kid) i was wondering if it is possable to put a sohc vtec head on a dohc d16 out of an first gen integra. thanks for the help, dont grill me to much on the nissan thing. David

10-26-2001, 10:25 AM	#2
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 42 Posts: 5,698	Hi, welcome to HS! I believe that conversion can be done.. Read this.. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-04-2001, 11:36 PM	#3
OneDopeTeg Posts: n/a	yes it is a possible swap....no crazier than the LS/VTEC. But I am not sure that the gain is worth the trouble....I am not too familiar with the swap...I just know it can be done

11-11-2001, 07:34 PM	#4
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	DOHC D16? D16's are SOHC engines. you CANNOT mate a SOHC head/block with a DOHC head/block. now on the other hand, if you mean can you use a SOHC teg block with a SOHC vtec head, then yes you can do so. as long as they are both D series engines you can.

11-11-2001, 08:02 PM	#5
OneDopeTeg Posts: n/a	damn my bad.....I did not read the thread close enough....I thought you were talkin bout a SOHC VTEC head on a SOHC nonVTEC block.....hybrid3doorcx is right.....DOHC on SOHC cant be done.