.:HSTuners::

JspecCrxSiR · 11-08-2005, 01:26 AM

does any one know how to make the hybrid trannys i have an si tranny thats busted but gears are good the rod that connects to the linkeage came out and its an si tranny and i have an hf tranny so i want to change to make a better tranny but dont know hoe can any one help thanks

*AzCivic* · 11-08-2005, 08:33 AM

get a helms manual, figure out what gear ratio's you want, and start swapping stuff around til it fits. you'll probably just want to take them both to a tranny shop and tell them what you want and they can replace anything else like bearings/synchro's which you might as well do since you got the tranny open.

thermal · 11-08-2005, 10:38 PM

Dude, no offense but you really need to start putting periods and commas on your threads.

However, I will attempt to reply to what I can decipher from your post.

If you want a hybrid tranny, you state specifics. But regradless, you must be a somewhat seasoned mechanic to get transmission work done. Gearing is some complicated stuff. Read up on it more. Like AZ said, get a Helm's manual.

*KwikR6* · 11-10-2005, 09:45 PM

Quote:

Originally posted by thermal

If you want a hybrid tranny, you state specifics. But regradless, you must be a somewhat seasoned mechanic to get transmission work done. Gearing is some complicated stuff. Read up on it more. Like AZ said, get a Helm's manual.

And how!

11-08-2005, 01:26 AM	#1
JspecCrxSiR 1st Gear Join Date: Apr 2005 Location: el paso tx Age: 44 Posts: 36	tranny help!!!! does any one know how to make the hybrid trannys i have an si tranny thats busted but gears are good the rod that connects to the linkeage came out and its an si tranny and i have an hf tranny so i want to change to make a better tranny but dont know hoe can any one help thanks __________________

11-08-2005, 10:38 PM	#3
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Dude, no offense but you really need to start putting periods and commas on your threads. However, I will attempt to reply to what I can decipher from your post. If you want a hybrid tranny, you state specifics. But regradless, you must be a somewhat seasoned mechanic to get transmission work done. Gearing is some complicated stuff. Read up on it more. Like AZ said, get a Helm's manual. __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-08-2005, 08:33 AM	#2
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	get a helms manual, figure out what gear ratio's you want, and start swapping stuff around til it fits. you'll probably just want to take them both to a tranny shop and tell them what you want and they can replace anything else like bearings/synchro's which you might as well do since you got the tranny open.