[Sivik]

ok to get to your gauges in your you need to do the following:

1) Remove the 2 screws at the top of the cluster housing.
2) The cluster surround piece is held in by clips, strong, but with enough force it will come off... just be patient.
3) There are 4 gold screws around the cluster unit itself holding in the dash, take those out.
4) Unplug wire harnesses.
5) To remove plastic cover, just press in all the tabs along the edge of the cluster and it will come off (make sure you remove the cluster light from the top first)
6) Now you have access to your gauges.
7) Reverse the steps to re-install.