|
i'm currently working on my interior. (get pics up when mostly done) doing mine black/red/white. here's how i'm doing mine:
plastics:
1. sand w/ 150 sandpaper until it's all rough, then sand again with 200 to smooth it out.
2. 2 light coats of primer wait til their totally dry, then take a brillo pad and sand the primer lightly, to smooth it out
3. 2 to 3 light coats of the paint (flat, not glossy) and brillo them lightly to smooth them out
4. spray with high gloss over coat let dry and your done w/ the plastics
vinyl:
1. whipe off with a wrag
2. take a brillo pad and rubbing alcohol (takes off any grease/armor all) and drys it out.
3. painted w/ black vinyl paint. (i found some vinyl/leather paint at a shoe repair shop, this paint is designed to be used on vinyl and lether shoes, so it's real durable.)
4. let it dry
|