Black wire goes to BARE METAL, must be bare metal.
Red wire MUST goto your parking light wire. Now this is the color and these are the locations:
Code:
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| PARKING LIGHTS +|red/black | |dkp/fuse box or *4 |
*4 Male blade terminal at fuse box. Also at the back of the dimmer switch.
if the wire is very tiny, you will HAVE to use a relay. If it isn't just tap into the wire. Very tiny i'm talking like 22 gauge like needle thing, bigger i'm talking like 14/16 gauge like i dono bigger then a needle lol but alot bigger, in any case u should use one just to be safe. Make sure you have an inline fuse so you don't screw up anything. If you need to wire using a relay you do it the following way:
85 - Parking lights
86 - Ground
30 - 12v
87 - red wire to gauges
87a - nothing
Good Luck ;D
- Your wiring man(jesu s and g od doesn't work)