|
With an AN style line, you are not supposed to use any type thread tape or sealer. However, sometimes they do leak without it. Seeing as this is a nitrous line that goes into either your NMU or out to your nozzle, I would highly recommend NOT using any thread tape. Thread tape can come loos and tear and either clog a nozzle, or damage a solenoid. If youcan not get the leak to stop by simply tightening the fitting (do not overtighten an AN fitting) you can apply a liquid teflon thread sealer. this will be availabe at Home Depot, ACE, or any hardware store, and most automotive stores. Simply ask for a Liquid Teflon Thread Sealer. Make sure you read the directions, and let it dry for a while before you turn on the bottle.
Good Luck. Hope this helped.
|