Oils
 

Does anyone know how many quarts of OIL, or in the south "UL", a 96 4 dr LX 5 spd needs? I wanna change my own oil and I dont have my owners MAN. dont know where to fidn that info. I = #1 n00bz0r. Thanks if anyone can help

Ok 5 people have looked at this but I have not gotten a response yet! I am guessing that this must have stumped more than just me! HAHA well I hope someone can help me out!!;)

mine takes about 3.5quarts, yours should be about the same.

Add 3qts and then add another SLOWLY until the dip stick has oil inbetween the holes at the bottom

I put 4 quarts of Mobil 1 in my car, but I run a larger filter (left) than normal (right)...

• 

You didn't ask, but your tranny takes 2 quarts. I use Red Line MT-90. :thumbsup:

Hey thanks a lot for your input..... this 96 is gonna take a loOOOoooOOOOt of work before i am finished with it. HAHA so expect more n00bness out of meh! I didnt even think to just add oil to my car until the dip stick said it was good to go.... n0000000bz0r i am;) ;)

:thumbsup:
we all start somewhere

nOOOOOObz0r, :no: i guess im not down with the lingo

Hey BlackDeuceCoupe..... how to put liquids in the tranny? I know I didnt ask but now that u said something I am thinking i need to do this... right away???

rxgoat.... n00bz0r = newbie= ME HEHE

there are 2 ways (probably more...) to get mtf into the tranny
1) the fill plug on the side of the tranny
2) from the vss hole on top/back of the tranny

(I fill via the vss because its A LOT easier)

read through this post:
http://honda-tech.com/zerothread?id=382416
and you can get a good idea of where stuff is. Then go outside and find it on your car.

• 

Note added to above^^^
After you drain the tranny fluid and replace the drain plug, fill the tranny until the trany fluid just barely comes out of the hole. It should be 2 qts. To fill it, you will need a funnel with a hose small enough to go into the hole.