![]() |
question about projector headlights
Is there a for sure way to balance out the beams, cause one of mine seems higher than the other, and i can't balance.... LOL :confused:
|
there should be screws in the back of the headlight housing that you turn to aim them...
|
i know that, but how to make sure that they're at the same angle
|
why dont you just cover one of the headlights, aim it against a wall and measure the beam, then do it for the other one. does it really matter if they're at PERFECTLY equal height?
|
to me it does, or atleast really close to the same height
|
theyre not supposed to be the same angle...the drivers side is supposed to be lower because of the drivers in the other lane...if its the same height as the passenger's it can blind people...
I HATE cars that have the drivers side up higher...and the problem is that 9/10 they dont even think about other people being able to see |
good point :) thanks
|
but also it seems as if my driver's side light is dimmer than the passenger side light...
|
that's because the different angle.
|
if you raise it and I happen to drive by u and I get blinded im comin after you;)
j/k |
LOL
|
i had that same problem but if i lowered the driverside i couldnt see on that side and was just lowwering it a little to make then level
|
to the guys who have projector headlights can you see in the night when ur driving with those on?
|
YES, LOL..... i can see blocks away :)
|
All times are GMT -5. The time now is 06:18 PM. |
Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com