Ladies....honestly....does shifter length matter?
 

Are short shifters bad? ;)

bwahahahahaha!!!!

You are to funny man...;)

LMAO


WHy?? Are you sporting a short shifter?


:eek: ;)

Depending on the situation a short shifter is prefered over a stock length shifter.. This allows for tighter gear change patterns making things a little faster..;)

LOL


You dont need to justify having a short shifter.. It'S all good man!

::yes:: ;)

Ok I wont then... ;)

So is faster--better? :)

in some cases you could say it is...;)

Currently I am sportin a slightly shorter than stock shifter :)

I think mines about 30% shorter then stock, but I cant remember for sure..

I want to get one thats about 40%-50% though.. It makes it feel sportier when its shorter.. ;)

It's not the size of the shifter that matters, it's how well it performs. ;)

so if i don't have a short shifter, or stock, slightly bigger, but I always make sure that performance is the key factor with me. Is that ok?
hahahahaaahahahah
sorry!!!

lmao.... eric your so funny! i cant believe you just posted this! Everyone is being on their best behavior.... *sniffle*... im so proud! ;)

I cut 3 inches off of my shift lever with a hacksaw. I must say, I'd do it again, given the chance. Throws are much tighter and smoother now :)

Try that with a true shorty.. You'll be amazed at how it feels..::yes::

True, but the only one on the market that actually improves things costs $300 for my car. I'm not that hung up on it..;)

300 bones???!!! For what car??? The GTI?

Yep. Rip-off, huh!

Thats crazy.. its almost hard to believe seems like a ton of money for a shortshifter... Whys it so much?

Lemme look it up, I don't want to whore this thread but, pretty much everything for the VR6 is freakin' ridiculous like that, 2.0 short shift kits are waaaaaaaaay cheaper.

$300.00 for a shifter!!! that's wack yo

C's short shifter costs that much...

You have to buy the whole shebang for a VR6.

I was wrong. It's $499.95 for my car and $229.95 for MkIV VR6's.

http://www.neuspeed.com/order/item_detail.php?id=220

Moral of the story? Cut 3" off of the stock lever ::yes::

Dang... Ill stick with honda.. Id cut it off too..

I heard that cutting the shifter doesn't werk like an actual shorty does?
is that true?
I heard becuase of placement and where that ball sits.

OUCH.

Its kinda technical really,

An actual Short Shifter is longer below the pivot point which when shifting gears it will make it shorter going from one gear to the other. If you take it off the top it maybe be a little less of a throw but not near as effect. So instead of reducing your throw, 40% you may reduce it 20%.. Hope this made at least a little sense..

(Im not 100% sure about the figures, If anyone has actually experimented with this and has a more solid number, please post them)

it did make sense...because the shifter isn't actually that much shorter. Its where the ball sits. Kinda hard to explain....but you know what I mean. ;)

Cool Its kinda hard to discride without being able to show you.

yeah i hacked 2 inches off mine, and have the adapter, so its pretty tight shifts, no one makes a true short shifter for me.

I have a short shifter.......in my car and love it..the feel is good w/ my neuspeed bushings..;) ;)

well see, when yer using a shorter throw shifter which is stock length, it feels much more solid and banging each gear is much more enjoyable for driver and passenger, especially when you throw on some more solid bushings, makes it more direct. ;) :cool:

i dont think the length of the shifter matters all that much, just the width and if you know how to use it to the fullest. just practice, practice and pracitce some more. you will get it eventually and when you hear your car make that nice moaning noise when you shift the gears, thats when you know you hit the spot. =)) good luck

my edge shorty is a 40%-60% decrease in throw. its awesome and only $185.00. Im afraid that japan is having some kind of manufacture problem with the shorties so they had to up the prices like hell. edge = american so woOt. I think the neuspeed one for my car was $385.00 and around that for every other jap / euro shifter. nopi told me exactly what hte problem was but i cant remember to the fullest. =/

Short shifters look cute and all.. but theres no handle on them. You can never get a GOOD grip. Short shifters also get the fluids flowin' quicker than a longer shifter. But I think its not the size of the shifter.. its the horsies in the engine that get me moving!

Thats not the shifters problem... The knobs all wrong..;)

Seriously tho.. I have the long shifter in my Civic and I want to get a short shifter.. can I change it myself? Or is it something reserved for those who know 'everything' about cars?

you can do it yourself, only takes about 30 minutes to switch out.

If I decide to change my name to Loraina Bobbet (I was never in a spelling bee.. pardon my spelling) and just cut it off.. how much do you know to cut and then how to you get the shifter back on cause now you just got a stubby?

i think you can safely cut like an inch off of it but since the stock shifter is threaded and you will be doing away with the threads, you'll need a shift knob that stays on with allen screws. or you could always J&B Weld the stock knob on the shifter :cool:

APC short shifters from pep boys: $40 ;)

I just did mine for the second time the other day... put new bushings in too... Id spend the extra 20$ and get the bushings to they make a big difference.. The hardest part is getting the car high enough off the ground to work comfortably, and working around the exhaust.. The rest is cake..

a jack that can lift the car about 2.5ft is OK! along with the jackstands to match :cool:

What in the heck is this???
RoboShifter

that thing is crazy insane, i was about to buy it when i was shopping for a short shifter......but i quickly realized i dont need a short shifter thats adjustable in several thousand points.

My Jack and Jack stands will only lift about 2 ft.. Then add the height of the creeper and my fat a$$ wrapped in a thick winter jacket it did leave me witha whole lot of room...


I agree... My fear with the thing is that one of the adjustment points vibrate loose and then you wont be able to shift..:o

i just bought some new jack stands today.....they have a 3' extension. its nice. i just need a working jack now ;) haha

I was at the dealership the other day because I couldn't seem to get the shift knob off my short shifter, luckly 1 of the lovely ladies that worked there could tell it was stuck and gave it a lube job which got it off. As she was lubein it she paused to ask me if I was sure it was a short shifter because it felt slightly larger than stock to her soon after she was almost finished she seemed to have a mouth full of words and asked me to come back to the dealership sometime and take her for a ride.

:rolleyes:

oooooh geez :rolleyes: lmao!

;) :D

You are terrible!:rolleyes: