i would say you should read all the stuff that steve has on his website !

that wrapped hose is going into the oil pan, you need to drill a hole for that
i think steve has those instructions !

i dun think u need the blue one....
the biggest hose is for the oil return which is that wrapped one

and there is a another black hose is for connecting ur air filter to your engine..........

just make sure you know what to do BEFORE you install it !
or else u will be in trouble

Isnt that tube a little short to reach the oil pan?

nope.. it will be actually too long, u will need to cut it
look at steve's picture of where he drilled his oil pan, it's very useful
u need to be careful of where to drill, too high won't be good, too low won't be good neither
so make sure u print that picture

speaking of drilling holes. where do i drill the hole in the intake piping for the sensor?

i didn't drill any holes for that
i just left it hanging there

GUYS HELP!!!!!!!!!!!!!!!!
 

I was unscrewing the sensor to join it with the tee when i felt sumthin drippin on my shirt. It was antifreeze!!! Im positive it wasnt oil! it was green and it smelled like antifreeze. Does anyone know why that is happening? I havent done anything but bolt up the turbo and connect the charge and intake pipes.

its coming from the corners of my oil pan

it's really hard to know where it is coming from...
you haven't touch anything that would matter the antifreeze...
sounds strange....
i am not sure.. but if u r saying it's coming from the corner of your oil pan, i think it's dripping from the front of ur engine....
check that out, and make sure where it is from....

where are you from? you from canada? do you have a block heater in your car?
if you do, maybe that's the problem
coz when you bolt on the turbo, the blcok heater will be in the way of the turbo, so when u bolt on the turbo hard, it will make that block heater leaks..
anyways, look carefully where it is leaking out....
good luck !

start a new thread if u can't find where it is leaking !