View Full Version : molding my bodykit?
sideshow775
07-21-2004, 11:14 AM
How do i properly mold the bodykit on my civic. Ive noticed it looks a lot better when its molded. Do i just take bondo and do it that way or is there other ways?
pdiggitydogg
07-21-2004, 04:24 PM
does anyone have a body kit here?
just asking
JDMFantasy2k
07-21-2004, 06:43 PM
a friend of mine just had his molded. It looked really sick and there is no noticible difference, the whole car looks like one piece. I'm assuming bondo (if done really good) could probably work however i'd suggest practicing on some shitty junkyard car first or something because if you fuck it up you're gonna have one hell of a mess:rolleyes:
pdiggitydogg
07-21-2004, 06:57 PM
eh I wouldnt think you really can screw it up since you can always remove it by sanding (forever if necessary).
Ive done drywall mud several times and I think thats a huge pain in the ass...and thats all flat...so I can only imagine how it'd be on a curved surface
CD5Passion
07-21-2004, 07:00 PM
here's some advice man, do not mold the kit, aside from it looking nice to begin with it's more of a pain then you want to deal with.
if it's your daily driver i strongly suggest against it, but if it's a show car thats another story
my friend has his drift kit molded to his cavy, one peice, i admit it looked nice but the trouble that came along with it...wasnt worth it
here's the problem with doing it, you will have to redo the "molding" job whenever you happen to hit a curb or just bottom out the seal will break and no matter how hard we tried there were always cracks. we molded it with fiberglass and bondo and we remolded it about 6 times before he ditched the cavy for a golf.
it's just a warning of the pains to come if you do it. but if you do i suggest put a layer of fiberglass along the back of the kit then put a layer of bondo over that and on the front bondo it and be ready with a powersander and lots of sandpaper.
I'd have to agree with Darin^ unless its going to be show only it really wouldn't be worth it, another thing that I've thought of other then the points he brought up is that its going to also be a real pain if you should get into an accident to have to undo all that sh*t to remove the damaged parts and then have to redo all of it again to make it look right
JDMFantasy2k
07-22-2004, 11:19 AM
yeah another thing about that, my friend installed a aem short ram on his car before he had the body kit installed, and he didn't remove the airbox piece that was in the bumper, he figured the guy doing his bodywork would...
come to find out he left it and molded the bumper so now that air box piece is stuck in there, making it look stupid and adding dead weight.
vBulletin v3.5.3, Copyright ©2000-2025, Jelsoft Enterprises Ltd.